ABS actuator test

Report any bugs found in multiecuscan
Post Reply
ttlogan
Posts: 9
Joined: 03 Apr 2010, 12:25

ABS actuator test

Post by ttlogan » 26 Jun 2010, 19:13

Actuator tests do not work in the ABS!
(Fiat Stilo 1.4)
Fiat stilo 1.4
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS actuator test

Post by yani » 26 Jun 2010, 19:28

Hi,

Which type of ABS do you have?

Please note that some tests require the engine to be running while others require the engine to be stopped.

Yani
Top
ttlogan
Posts: 9
Joined: 03 Apr 2010, 12:25

Re: ABS actuator test

Post by ttlogan » 27 Jun 2010, 07:13

HI Yani!

My ABS type Bosch ABS 8!
Test does not allow any,but I'll try again tomorrow!
Have any idea what could be the problem?
Fiat stilo 1.4
Top
ttlogan
Posts: 9
Joined: 03 Apr 2010, 12:25

Re: ABS actuator test

Post by ttlogan » 27 Jun 2010, 07:34

It is only natural to connect TO THE ABS with EBD FAILURE and ABS FAILURE
message to the instrument panel display?
Fiat stilo 1.4
Top
ttlogan
Posts: 9
Joined: 03 Apr 2010, 12:25

Re: ABS actuator test

Post by ttlogan » 28 Jun 2010, 10:30

Hi!

Today I tried again, but it does not work either in Actuator test!
Regardless of whether the engine is running or stopped!
Fiat stilo 1.4
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS actuator test

Post by yani » 28 Jun 2010, 11:15

Does it give you an error message?
Or, it runs but nothing happens?

What type of interface do you use (VagCom or ELM)?

Yani
Top
ttlogan
Posts: 9
Joined: 03 Apr 2010, 12:25

Re: ABS actuator test

Post by ttlogan » 28 Jun 2010, 17:34

Hi Yani!

Modified Vagcom cable!
Error message: Failed to execute

The lower left corner: Sometimes too high Latency

Is the port settings for me "1" latency
Fiat stilo 1.4
Top
lybra2.4jtd
Posts: 1
Joined: 15 Dec 2010, 18:31

Re: ABS actuator test

Post by lybra2.4jtd » 15 Dec 2010, 18:53

Hi Yani!
I have a vag-com cable and I successfully connect with ABS ECU. But shows the errors for ABS and EBD failure message to the instrument panel display. :? When I disconnect the ECU, the errors disappear.
Why this happened? What is wrong :?:
Thanks for help.
Top
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ABS actuator test

Post by yani » 15 Dec 2010, 21:05

lybra2.4jtd wrote:Hi Yani!
I have a vag-com cable and I successfully connect with ABS ECU. But shows the errors for ABS and EBD failure message to the instrument panel display. :? When I disconnect the ECU, the errors disappear.
Why this happened? What is wrong :?:
Thanks for help.
That is normal. There is nothing wrong.
Top
adibadi
Posts: 1
Joined: 23 Oct 2010, 16:57

Re: ABS actuator test

Post by adibadi » 20 Dec 2010, 19:47

Hi!
I have a 1.4 8v Fiat Albea. I can connect to the ABS, read parameters but can't test any of the actuators. Appears to be doing but nothing happens, there is no sound nor any solenoid and the pump motor. KKL interface modified and Bosch ABS 5.3.
Regards from Romania!
Top
Post Reply

Return to “Bugs”