Are you planning to add programming of the new transporders in the new versions?
PS I am speaking of the 147/GT keys
The reason for all this is the fact that I had to repair a 147 key, and they are very difficult to open, they are glued. So while repairing it ( I had to weld microswitch because it was broken) I had to cut it in half and know it looks bad.
I was planning to buy a second hand one from the ebay and to programm it to work normally as a 3-rd key.
I have code card and both original keys.
Is this even possible ? I have read that it is not even possible to programm another used key to start the engine?
The sollution to take transporder glass ampule from original one and to put it to a new one is not a vallid sollution because the ebay key will be 100% a glued key also...but metal blade can be taken from original key and installed inside with little force
![Smile :-)](./images/smilies/icon_e_smile.gif)
much easier than cutting the new used key with the cutter. If I cut it I will destroy it as I destroy original key and I am back to the starting situation but with 2 keys that look bad when I glue them.