Selespeed Clutch self calibration

Report any bugs found in multiecuscan
Post Reply
spyshagg
Posts: 12
Joined: 14 May 2010, 21:54

Re: Selespeed Clutch self calibration

Post by spyshagg » 23 Jan 2011, 13:29

yes and mine and other stilos selespeed have 15.7mm instead of 28.5
Top
Entonox
Posts: 25
Joined: 25 Feb 2010, 13:59

Re: Selespeed Clutch self calibration

Post by Entonox » 24 Jan 2011, 10:06

Yes that is correct, i also read that value out of my selespeed system.
Top
Belli29
Posts: 10
Joined: 24 Dec 2009, 12:38

Re: Selespeed Clutch self calibration

Post by Belli29 » 02 Feb 2011, 23:27

28.00 mm - 28.50 mm are valid only in 5 gear Alfa Romeo Selespeed models. !!!! (Engine off)

best regards

Belli
Top
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg » 17 Aug 2012, 15:09

Apologies for digging out old post... But what is the difference between doing the "clutch self calibration" and "calculation the degradation index"

Do we have to do both when a new clutch is replaced?

it is better to use a VAG com or ELM327?

Appreciate any response!
Top
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg » 19 Aug 2012, 02:35

I did the clutch self calibration by following the instruction closely

(ensure engine and fluid temperature are correct, accelerate in 2nd till 3000rpm and stop)

but the end result is still "NOT PERFORMED" by reading the gearbox parameter.
Top
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg » 21 Aug 2012, 03:22

Anyone?
Top
Post Reply

Return to “Bugs”