Proxi alignment failure

Report any bugs found in multiecuscan
Post Reply
acgiannopo
Posts: 5
Joined: 17 Jan 2023, 21:37

Proxi alignment failure

Post by acgiannopo » 20 Jan 2023, 18:55

Good afternoon to you all.
I have an Alfa GT 2.0JTS 2004 model. I recently purchaced a new dashboard, a blackline which comes from the facelift model. Both panels are the selespeed ones. The panel works fine. However, we tried today to perform the proxi alignment procedure in order to stop the flashing odometer but didn't manage to. We (me and my mechanic) tried with MultiEcuScan v4.8 multiplexed via a CanTier usb cable several times. Kept responding that it failed due to system error. Unfortunately we didn't save a copy of the report in order to have more details. Any ideas? Is it possible to solve it someway?

shpuncik
Posts: 306
Joined: 19 Oct 2018, 16:43

Re: Proxi alignment failure

Post by shpuncik » 21 Jan 2023, 13:06

logs are saved in MES installation folder. check there.

acgiannopo
Posts: 5
Joined: 17 Jan 2023, 21:37

Re: Proxi alignment failure

Post by acgiannopo » 24 Jan 2023, 17:11

shpuncik wrote:
21 Jan 2023, 13:06
logs are saved in MES installation folder. check there.
Thank you. I will come back with details.

acgiannopo
Posts: 5
Joined: 17 Jan 2023, 21:37

Re: Proxi alignment failure

Post by acgiannopo » 25 Jan 2023, 16:30

So, I'm coming back with the log from multiecuscan:

Reading CAN configuration data ...
CAN CONFIGURATION DATA:
00 00 1D 6B 00 00 1D 6B 00 00 08 01 00 00 00 01 00 00 00 00
00 00 1D 6B 00 00 05 09 00 00 1D 6B 00 00 05 09 00 00 05 01
36 30 36 39 33 34 36 37 20 20 20 50 50 45 41 43 45 45 45 53 49 20 03 06 20 6B 1D 00 00 09 05 00 00 49 00 00 82 26 07
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Dashboard Node (IPC/NQS)
Receiver Radio/Radio Navigator Node (NRR/RMN)
Brake System Node (ABS/BSM/NFR)
Driver Door Node (NPG)
Climate Control Node (HVAC/NCL)
Automatic Transmission Node (TCM/NCA/NCR)
Steering Angle Sensor Node (NAS)
(Multiecuscan 4.8)
1/20/2023 4:25:12 PM
Alfa Romeo GT JTS 2.0
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------

Body Computer Node (BCM/NBC): EOL Ok
Engine Control Node (ECM/NCM): Ok
Dashboard Node (IPC/NQS): EOL Failed
Receiver Radio/Radio Navigator Node (NRR/RMN): Ok
Brake System Node (ABS/BSM/NFR): Ok
Driver Door Node (NPG): EOL Ok
Climate Control Node (HVAC/NCL): EOL Ok
Automatic Transmission Node (TCM/NCA/NCR): Ok
Steering Angle Sensor Node (NAS): Ok

EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) FAILED! - Configuration not supported by system error
Writing to module: Driver Door Node (NPG) SUCCESS!
Writing to module: Climate Control Node (HVAC/NCL) SUCCESS!
FAILED TO EXECUTE
Dashboard Node (IPC/NQS) FAILED! - Configuration not supported by system error


Hope this can help somebody to give me an idea of how to solv the proxi alignment issue I have.
Thank you in advance.

chrener
Posts: 175
Joined: 07 Jun 2018, 13:08
Location: Košice, Slovakia
Contact:

Re: Proxi alignment failure

Post by chrener » 26 Jan 2023, 08:40

HI!
As you can see your dashboard has EOL Failed status...
So here is main problem.
Probably your BCM cant recognize this IPC type...
Try to flash your BCM unit with newest software if it is available...
And you will see...
Jeep Renegade 1.4 MultiAir TURBO 75th Anniversary

acgiannopo
Posts: 5
Joined: 17 Jan 2023, 21:37

Re: Proxi alignment failure

Post by acgiannopo » 01 Feb 2023, 23:57

chrener wrote:
26 Jan 2023, 08:40
HI!
As you can see your dashboard has EOL Failed status...
So here is main problem.
Probably your BCM cant recognize this IPC type...
Try to flash your BCM unit with newest software if it is available...
And you will see...
Issue fixed with custom proxi procedure. :-)
No more flashing odometer.

chrener
Posts: 175
Joined: 07 Jun 2018, 13:08
Location: Košice, Slovakia
Contact:

Re: Proxi alignment failure

Post by chrener » 10 Feb 2023, 08:03

what needed to be changed in custom proxi?
Byte number and value?
Jeep Renegade 1.4 MultiAir TURBO 75th Anniversary

Post Reply