Fiat 500x Proxy fails

Report any bugs found in multiecuscan
Post Reply
Choconinja
Posts: 2
Joined: 06 Oct 2019, 14:23

Fiat 500x Proxy fails

Post by Choconinja » 06 Oct 2019, 14:51

I have a fiat 500x from 2017. I changed the oem radio for an Android radio from joying. Now the mileage indicator always flashes. I read in the forums that a proxy alligment should help here, but it fails.

The wired adapter elm is from electronic-fuchs.de including adapter 5 and 6.

The connection has no errors. But the proxy fails and the kilometer display still flashes.

What can I do?

CAN CONFIGURATION DATA:

4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 01 08 00 00 00 00 00 00 08 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 00 00 01 00 0A 00 00 00 00 00 00 00 33 38 33 33 34 30 34 31 30 37 32 4F 55 54 50 55 54 2D 53 49 54 20 17 01 16 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 4F 0C 40 05 10 00 01 00 0A 00 00 00 00 00 00 00 D1 EA 1D 01 AD 81 07 E2 40 27 09 07 40 10 10 03 A3 1E 44 92 01 35 73 14 01 4F 03 34 00 B3 AC 01 4A 4B 07 00 8A 02 10 EE 00 00 20 04 00 01 03 54 FA 08 06 A5 00 42 00 01 8A 12 3D 40 00 01 03 C1 00 15 34 11 00 00 49 02 81 14 5B 42 04 00 00 33 AA 99 71 20 80 00 86 00 00 00 01 00 00 00 00 00 00 00 00 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


(Multiecuscan 4.4) 27.09.2019 14:20:03 Fiat 500X 1.4 16V T-Jet/MultiAir CAN Setup / PROXI Alignment Procedure (334)

Body Computer (BCM/NBC) EOL Ok
Motorsteuerung (ECM/NCM) EOL Ok
Instrumententafel (IPC/NQS)
EOL Ok Automatikgetriebe (TCM/NCA/NCR) EOL Ok
Knoten Getriebewählschalter (ESM/GSM/NSC) EOL Ok
Radio Frequency Hub Node (RFHM) EOL Ok
Drive Train Control Node (DTCM) EOL Ok
Klimaanlage (HVAC/NCL) EOL Ok
Entertainment Telematic Node (ETM) EOL Fehler - Timeout error
Comfort Seat and Wheel Node (CSWM) EOL Ok
Elektrische Lenkung (EPS/NGE) EOL Ok
Bremsanlage (ABS/BSM/NFR) EOL Ok
Knoten Parksensor (PAM/NSP) EOL Ok
Knoten Airbag (NAB/ORC) EOL Ok

s130
Posts: 627
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: Fiat 500x Proxy fails

Post by s130 » 06 Oct 2019, 17:36

I'm not saying that this is your issue but but it may be due to your ELMs link speed and buffering.

I had an issue (some time ago) where Yani confirmed that 500X/Renegade vehicles had an issues with Proxi.

Originally ELM devices ran at a fixed speed too slow for Proxi on 500X/Renegade. However OBDLINK was faster "out of the box". I worked with Yani and tried OBDLINK and all was OK. Then Yani sent me some test code that would switch some/new ELM devices to a higher operating speed. This worked OK for me.

My suggestion is that you select the highest ELM operating speed offered in the MES settings.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Choconinja
Posts: 2
Joined: 06 Oct 2019, 14:23

Re: Fiat 500x Proxy fails

Post by Choconinja » 10 Oct 2019, 15:01

is it this adapter?

https://www.amazon.com/ScanTool-425801-OBDLink-USB-Diagnostic/dp/B005ZWM0R4/ref=pd_sim_auto_3?ie=UTF8&refRID=1EMGMTWBYKCR62ACW5PM&tag=scantonet-20

s130
Posts: 627
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: Fiat 500x Proxy fails

Post by s130 » 11 Oct 2019, 16:16

Yes that is the one, as long as it is a genuine OBDLink unit, which I think it is. You can double check on the OBDLink website.

http://www.obdlink.com/sxusb/
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply