Check in the engine ECU and not the Service node. If you have a diesel Stelvio then the Oil Change Reset is on the engine ECU Adjustments.
Also note that there are only 9 service coupons by default so after the 9th service the service reset will not work unless to reset the coupons as well.
Search found 825 matches
- 04 Nov 2023, 11:12
- Forum: Usage Q&A
- Topic: USA Stelvio 2019 cannot reset oil change
- Replies: 3
- Views: 4046
- 25 Oct 2023, 07:13
- Forum: Usage Q&A
- Topic: Odometer different value in ecu and dashboard odometer
- Replies: 8
- Views: 9427
Re: Odometer different value in ecu and odometar
That is my understanding of how it works. It is not unusual to have at least one or more reprogrmmings registered. Everytine the Fiat dealer services the car under warranty then there will be updates to the cars systems, ECUs etc that thay will apply. Some of these reprgrammings will not be to necce...
- 24 Oct 2023, 09:51
- Forum: Usage Q&A
- Topic: Odometer different value in ecu and dashboard odometer
- Replies: 8
- Views: 9427
Re: Odometer different value in ecu and odometar
The "Odometer at Last Programming" shows the odometer reading when the control unit was last programmed. Programmed here basically means and engine ECU update/code changed. You won't be able to change the dashboard odometer value to match the engine ECU as you can not lower the dashboard odometer va...
- 23 Oct 2023, 16:38
- Forum: Usage Q&A
- Topic: Odometer different value in ecu and dashboard odometer
- Replies: 8
- Views: 9427
Re: Odometer different value in ecu and odometar
On your Punto then only the Engine ECU, Dashboard and Service,
- 23 Oct 2023, 11:41
- Forum: Usage Q&A
- Topic: Odometer different value in ecu and dashboard odometer
- Replies: 8
- Views: 9427
Re: Odometer different value in ecu and odometar
It is pretty common to see different miles/km in the Odometer and the engine ECU and other units (where recorded) I do not think that anybody has come up with a reason for these differences. It has been suggested that the differernces are down to internal conversion errors between miles and km / km ...
- 20 Oct 2023, 11:08
- Forum: Usage Q&A
- Topic: CanTieCar proxy alignment
- Replies: 6
- Views: 9333
Re: CanTieCar proxy alignment
What is your actual Ducato model? There are many listed here: https://www.multiecuscan.net/SupportedVehiclesList.aspx Later models require the A3 adapter. If your CantieCar can't support the required A3 wiring then and actual A3 adapter may work. You can also ask MES support about older CanTieCar ad...
- 18 Oct 2023, 07:23
- Forum: General
- Topic: Rules and Permitted Posts
- Replies: 1
- Views: 7751
Re: Rules and Permitted Posts
This forum is for MultiECUScan and Vehicle Support Topics ONLY! References to other diagnostics and tools are permitted where these add value and information relevant to MES, vehicle support and diagnostics. Free speech, religion, politics, SPAM, advertising of other sites and products, links to ill...
- 17 Oct 2023, 07:18
- Forum: Usage Q&A
- Topic: CanTieCar proxy alignment
- Replies: 6
- Views: 9333
Re: CanTieCar proxy alignment
Contact CanTieCar support and ask them. If not they may have an cheeper upgrade offer for you.
- 16 Oct 2023, 19:13
- Forum: Usage Q&A
- Topic: CanTieCar proxy alignment
- Replies: 6
- Views: 9333
Re: CanTieCar proxy alignment
I'm not a CanTieCar user or expert but I gather the devices firmware can be updated to support other stuff and correct previously know problems.
Suggest you investigate this course of action.
Suggest you investigate this course of action.
- 21 Sep 2023, 07:07
- Forum: Usage Q&A
- Topic: 2018 Fiat 500L Proxy Alignment Issue - Radio Replacement
- Replies: 5
- Views: 8796
Re: 2018 Fiat 500L Proxy Alignment Issue - Radio Replacement
On some later Fiats a Security Gateway Module (SGW) is fitted. This is connected somewhere in line between the EOBD port and the Engine and some other ECUs. Its purpose is to block WRITE EOBD commands unless a vehicle specific security code is is fitted. An SGW Bypass is a plug which one inserts in ...