Multiecuscan

Hello lonerunner Your interface test shows that this ELM may not be compatible with Multiecuscan. Unfortunately, it is often the case when the version v1.5 in ATZ and ATI is displayed the interface as not with MES functional. Unfortunately, this statement is not universally valid There are also v1.5...

Hello lonerunner After your first contribution I have assumed that you have already established a connection, but no CAN connection get. Unfortunately, I have to ask the same questions again and again. Always an absolute test should always be done With you a setting error or the wrong driver was ins...

Hello Lonerunner


Do you remove the red marked Resistor
Then you can read the CAN Bus Protokoll

http://www.bilder-upload.eu/show.php?fi ... 779301.jpg


Greetings Eddy

Hello Right Side from the chip (MCP2551) is a resistor (1200) this you have to remove Greeting Eddy Thank you! I removed the mentioned transistor and had success in the proxy alignment procedure! Only I could not disable the beeper seat belt, but this requirement was minimal. Thanks a lot for the h...

Dear people, I have a Brazilian Fiat Punto Attractive 2013/2014 and Multiecuscan 3.2. I bought generic Wifi OBDII V.1.5. I tested scan and receive "Magneti Marelli IAW 7GF Injection" ISO Code: CD 85 9E 8C 51 . Ok, I conected but I cant conect in Service, I receive error ECU.. This is a resistor pro...

Hello all! Again... Sorry for delay... :( I have a Fiat Stilo 1.8 8v 2009 in Brazil , a ELM 327 1.5a USB and Multiecuscan 3.0: http://i.imgur.com/617ArMI.jpg The result of Test interface: COMMAND: ATZ RESPONSE: ATZ ? > COMMAND: ATI RESPONSE: ATI ELM327 v1.5 > COMMAND: ATE0 RESPONSE: ATE0 OK > COMMA...

Hello, I have a problem with Multiecuscan and my Interface. I use this interface: http://www.ebay.de/itm/ELM327-USB-V1-5-CAN-BUS-OBD2-OBDII-Auto-Diagnose-KFZ-Testgerat-Interface-Scanner-/221826322883?hash= item33a5e111c3: g: 0OcAAOSw3ydVpMlp The connection to the ECU works. Clear error in the ECU w...

Hello
Your interface is Version V2.1
And therefore not compatible with MES or AlfaOBD
Greeting Eddy

Hello


The drivers on the CD are useless
throw the CDs in the garbage

http://www.ftdichip.com/Drivers/VCP.htm

Setting Latency Time

Device Manager / Comports / properties / extended / latency time



Greeting Eddy

Hi prime.4alpha: Same interface, same Multiecuscan´s version, same cables/adapters AND THE SAME PROBLEM. I´ve tried a lot of configurations, parameters and combinations, but always get the same response on the test interface: "VagCom/KKL Testing latency with 200 bytes of data... The operation has t...