Multiecuscan

You don't say which car you are using it on?

The 3-Pin message almost certainly means that you need a 3 pin adapter cable to plug into the ELM cable to connect to you car which uses 3-Pin connectors and not an EOBD connector.

Good idea and certainly possible. What I don't know is the ability and latency involved to scan for errors/fault codes whilst doing real time signal monitoring. If I were doing this then I would be looking for fault codes as a minor issue but certainly focussing on trying to detect the EML signal. O...

I'll hold my hand high here and say that I'm beginning to get out of my depth and experience here. However I'll throw some comments in to a) attract others to the tread and b) possibly spark some thought/research at your end. Why did you replace the original DPF? What were the circumstances that led...

When you replaced the DPF did you in MultiECUScan intiate/operate the DPF replacement function?

If not then please try this.

Please chexk again the supported vehicles lists.

Itens in RED require a registered/paid for version of MultiECUScan.

Check here: http://www.multiecuscan.net/SupportedVehiclesList.aspx

If you stil have a problem then please post back.

Nick /////

Well I will disagree. I disputed your 100% claim that all cars ECU that show zero have been tampered with. May be true for some but not all so claiming 100% will uneccessarily frighten some people! Fiat Croma EDC16/39 CF4 is a known case. (same ECU as AR159). I have the above, from new and it has ne...

TribesMan wrote:If you see 0.0km then this is a sign of playing with odomter on the dashboard. 100%

Sorry, have to disagree with 100% statement.

Email support@multiecuscan.net con tutti / tutte le informazioni di acquisto rilevanti si dispone.

Email support@multiecuscan.net with all/any relevant purchase information you have.

Re connector, yes you are right I had forgotten there was an aircon pressure sensor on the engine ECU readings. Sorry to all for any confusion. Regarding the ECU odometer value being zero then I have this exact same problem on my Croma which uses the smae ECU. This is a known "feature" and has been ...

You are using Adaptor Cable 1 ? This connects the K Line Pin-7, to Pin 9.