Search found 831 matches
- 13 Jun 2016, 14:20
- Forum: Usage Q&A
- Topic: Oil Lamp flashing software question
- Replies: 2
- Views: 3368
Re: Oil Lamp flashing software question
According to this: http://www.multiecuscan.net/SupportedVehiclesList.aspx you 1.9 engine is supported and the Oil Change flag can be reset on the free version. You will not however be able to connect to any other ECU/Module. Also I see no Service Reset function for your vehicle. For the engine ECU a...
- 11 Jun 2016, 09:12
- Forum: Usage Q&A
- Topic: MULTIPLA WON'T CONNECT TO ENGINE ECU
- Replies: 4
- Views: 3791
Re: MULTIPLA WON'T CONNECT TO ENGINE ECU
Looking at the supported vehicles list here: http://www.multiecuscan.net/SupportedVehiclesList.aspx I see that the 1.9 JTD has two options for the Engine ECU. Bosch EDC15C7 CF3/EOBD Bosch EDC16C39 CF4/EOBD Have you selected the correct one and ALSO the correct Multipla. Also ensure the switch on you...
- 01 Jun 2016, 08:07
- Forum: General
- Topic: fiat ecu scan cable
- Replies: 1
- Views: 2261
Re: fiat ecu scan cable
Read this page: http://www.multiecuscan.net/SupportedVehiclesList.aspx
You will see that different vehicle systems are connected to different EOBD pins. This means that you need a suitable modified cable or a set of adapter cables. Alternatively you need the expensive Mulitplexed system.
You will see that different vehicle systems are connected to different EOBD pins. This means that you need a suitable modified cable or a set of adapter cables. Alternatively you need the expensive Mulitplexed system.
- 30 May 2016, 09:41
- Forum: Usage Q&A
- Topic: Need to reinstall after hard drive change
- Replies: 2
- Views: 4730
Re: Need to reinstall after hard drive change
From the User Manual: Note the contact support is assistance required. License Transfer functionality In case you need to change or re-install your computer you can transfer the license to the new system by using the License Transfer functionality of Multiecuscan. Here is how to use the License Tran...
- 13 May 2016, 10:54
- Forum: General
- Topic: Scaled km?
- Replies: 1
- Views: 3024
Re: Scaled km?
This is a known *vehicle* issue. I used to have a Croma and initially from new the Engine ECU kms/miles matched the vehicle dash odometer reading. The at some later date the two values did not match. I know the main odometer was correct as I always keep a detailed fuel/mileage log. You can also read...
- 27 Apr 2016, 16:32
- Forum: Usage Q&A
- Topic: A Hello and request for help
- Replies: 2
- Views: 2922
Re: A Hello and request for help
I would not worry about the facelift / no facelift. If facelift works then this is what you should be using. If you read here: http://www.multiecuscan.net/SupportedVehiclesList.aspx and scroll to: Fiat / Ducato (type 250) Facelift / 2.3 Multijet you will find all the required connectors / pin connec...
- 24 Mar 2016, 16:07
- Forum: General
- Topic: software purchse
- Replies: 1
- Views: 1739
Re: report
Report is sent back to MES Support / HQ.
The report, connection logs, data etc. should be in the MES Program Directory.
The report, connection logs, data etc. should be in the MES Program Directory.
- 18 Mar 2016, 12:42
- Forum: General
- Topic: Pacchetto Vip
- Replies: 2
- Views: 2758
- 14 Mar 2016, 14:13
- Forum: Usage Q&A
- Topic: Proper execution of the "oil change" procedure
- Replies: 5
- Views: 6288
Re: Proper execution of the "oil change" procedure
Well this is good news.
I don't recall any "delay" in updated data being available other than disconnecting / ignition off / ignition on / reconnecting.
I won't be able to test myself as I no longer have my Croma diesel engine and have reverted to petrol
I don't recall any "delay" in updated data being available other than disconnecting / ignition off / ignition on / reconnecting.
I won't be able to test myself as I no longer have my Croma diesel engine and have reverted to petrol