Multiecuscan

Yani
i don't think that will be a problem to you for testing.
I think a lot of guys from this forum can test your softwear and send you the review of it.
If you like I can do that for you. Absolutely for free and I don't want anything back.
I want to help you because you do a great job.
That's all

ELM327 v1.3 works great.
And the ELM327 v1.4 will be better.

I opened up my interface and I looked.
I have the bottom blue one.
The soldering are the same like your.

ME3.1 it is covered by the last version 2.3.1 of FES, you can use it.
If ou use that VAGCOM interface you should change the latency from default 16 to 2
And the last driver for it you can found here http://www.ftdichip.com/Drivers/CDM/CDM20602.zip

No you can do it.

To rset service interval you need a registred version of multiecuscan and an EL327 v1.3+ interface.
If you use an ELM 327 v1.2 or that chinese v1.5 you'll nannot connet anymore.
I tried it with an v1.2 and it dosen't worked, now I have an v1.3 and it works like a charm.
Try it

Buy a vagcom 409 interface and i will show you how you can do the pins soldering.
You how you contact me because we spoke in another forum. Don't you remember.

You can't use that interface with multiecuscan
You need an older version 409

Hi guys. I had an ELM327 v1.2 bluetooth and it dosen't work. I mean with that interface I couldn't reset service interval. For me it didn't work on ABS too. So I think is better to have an ELM327 v1.3a+ Now I have this kind of interface (it's a chinese clone) and it works great. I wait Yani to upgra...

@EnIgMa I understan Italian but I can't write, so in this case I'll ask you in english. You can replay in italian if it's easy for you. The question is that tool OBDLINK working with multiecuscan, never mind if its clone or not? Much more than that you can make a firmwear upgrade. So do you have thi...