Multiecuscan

I know it's an old post but... Is it possible to program a used remote for Fiat Punto '99 and '03?

You need an ELM327 that is v1.3 or later.

Also, please be more specific, add as many information about your car, elm327, etc., as it is very hard to respond to "questions" that are too brief.

I have a Fiat Punto mk2b. What is the node programming sequence order of the PROXI Alignment procedure? For example, NBC first, then NQS, etc.. Also, is the sequence defined by Multiecuscan, or is it a requirement by the nodes? I'm asking this because for some unknown reasons Proxi alignment fails o...

Dear members! Me and my friend have the same problem and error with Multiecuscan. I'm using the latest 3.7 version, my friend uses some older version. When we try to do proxi alignment on our Fiat Punto mk2b, the proxi fails at the dashboard with Unknown error. We both have the largest LCD version o...

I have the original mk2b dashboard now, which is aligned with the other ecus. Now the problem is, it was form a car with automatic transmission. I need to disable the fault for automatic transmission in the dashboard, but the proxi fails for this dashboard also. Is it possible to disable it? If so, ...

The instrument cluster needs to be proxi aligned, as it is from another Punto. The LCD display is flashing, and MES shows EOL Failed for the dashboard unit.

I'm also interested in the answer. Thank you!

I have the same problem, but for Fiat Punto MK2B. It says EOL Failed for the Dashboard node.

Hello! I'm having problems with PROXI Alignment on my Fiat Punto mk2/B, the Dashboard unit always fails. Here is the log output: Reading CAN configuration data ... CAN CONFIGURATION DATA: 00 00 00 0F 00 00 00 0F 00 00 00 06 00 00 00 00 00 00 00 0F 00 00 00 09 00 00 00 0F 00 00 00 09 00 00 00 01 35 3...

Hello! I'm planning to do a project, that sends "custom" info to the Fiat Punto mk2 Instrument Panel, to display additional information, such as outside temperature, etc. I saw in the free version of multiecuscan, that there are 3 LCD panel "tests", full segment, odd and even segment test. Are these...