Multiecuscan

Hello

The ECU at 159 you can read the KL interface, just the service you need to put back an ELM interface for the 159
All other controls are almost only to read with one ELM.

greeting
Eddy

@ epolus

Hello

I have a compact Elmscan5,
But only a 156 year 98 and this has no CAN

The Elmscan5 but is recognized as the Interface Test v1.3
and I know of no connection with these problems in the area CAN

But unfortunately I could not even testing a Fiat 500.

Greetings Eddy

Hi

I also have a ElmScan 5 and it works without problems with Multiecuscan

Greetings Eddy

@ Darkman

Great, you've found the right words.

Greetings Eddy

Thanks Yani

For your answer.


Greetings Eddy

Hello

Nice that now the air conditioner is supported
Thanks Yani

But what interface do I need for my Alfa 156 from year 2002
the list is only what adapter is needed.

Is the air conditioner to read the KKL Interface?
or just using the ELM 327?

I hope you can help me

Thanks Eddy

On my Vista 64 bit FES now starts much faster

Thanks Yani

Greetings Eddy

To the right of the vehicles on the side of Supported Vehicles are Adapter
shown. There you can see how and why the adapters are required.

Greetings Eddy

You need to remove the relevant controls to read the designated adapter access to the pins to read about these controllers. With a standard interface from the trade you can read no ABS or airbag. In the list of supported adapters Occupancy Vehicle control is shown. Look at the times, and you underst...

today i replace the 2kohm R with a 4.7 kohm one. but again there is no comunication with dash or body on fiat 500. i will try to replace the 2 cap 560 pf... i hope this is the last one .... thank you all . ps. if some one has the solution of this problem please let me know Hi Why do you have the 2 ...