Search found 825 matches
- 24 Oct 2013, 11:17
- Forum: Bugs
- Topic: servis oil light reset.
- Replies: 5
- Views: 4192
Re: servis oil light reset.
No that cable/device will not work. If you are not using MultiECUScan software/hardware/cables then you will need another device to do what you want to do. Something like http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR11.TRC1.A0.Xfiat+service+reset+tool&_nkw=fiat+service+reset+tool&_sa...
- 22 Oct 2013, 09:56
- Forum: Bugs
- Topic: servis oil light reset.
- Replies: 5
- Views: 4192
Re: servis oil light reset.
Which Linear model? Engine? Diesel? Petrol? (and yes I know petrol engines don't normally have an oil lamp/degradation indicator)
- 12 Oct 2013, 17:18
- Forum: Usage Q&A
- Topic: Punto ECU not found
- Replies: 12
- Views: 7830
Re: Punto ECU not found
No basically the 54 plate date means that the vehicle was FIRST register in the 2004/2005 timeframe. The vehicle could have been manufactured in say 2003 and stood around the docks / dealers for a year or more before being sold an registered. Also in the UK it is possible to transfer licence plates ...
- 12 Oct 2013, 11:35
- Forum: Usage Q&A
- Topic: Punto ECU not found
- Replies: 12
- Views: 7830
Re: Punto ECU not found
54 is the UK registration plate date number.
In this case (54) the user's car was registered a new between 1 September 2004 and 28 February 2005
In this case (54) the user's car was registered a new between 1 September 2004 and 28 February 2005
- 02 Oct 2013, 17:05
- Forum: General
- Topic: Newbie info, proxi alignment
- Replies: 3
- Views: 4285
Re: Newbie info, proxi alignment
Yes that should work as 1) they are recommended distributer and 2) they claim MultiECUScan and AlfaOBD compatibility.
If you have problems then at least you have a reputable and contactable provider.
If you have problems then at least you have a reputable and contactable provider.
- 30 Sep 2013, 20:09
- Forum: Usage Q&A
- Topic: Live parameters reading procedure
- Replies: 2
- Views: 1687
Re: Live parameters reading procedure
Nothing basically wrong with what you posted. As long as MultiECUScan is happy then you can basically rely upon captured data.
- 30 Sep 2013, 17:04
- Forum: General
- Topic: Newbie info, proxi alignment
- Replies: 3
- Views: 4285
Re: Newbie info, proxi alignment
First look here: http://www.multiecuscan.net/SupportedVehiclesList.aspx Scroll down to your particular Fiat Stilo Model. Specific interfaces and cables are indicated on the right hand side against each car ecu/module. Control units in RED require the Licensed version of the code. Modules in RED are ...
- 29 Sep 2013, 21:06
- Forum: Bugs
- Topic: vista problems
- Replies: 1
- Views: 1829
Re: vista problems
I have run both FiatECUCan and MultiECUSCan (MECUS) on the MS Win Vista and Win 7 platform with no problems.
As you say you have to use msconfig to successfully run MECUS then clearly there is another program interfering with MECUS.
Solving this could be easy or difficult..........
As you say you have to use msconfig to successfully run MECUS then clearly there is another program interfering with MECUS.
Solving this could be easy or difficult..........
- 25 Sep 2013, 18:28
- Forum: Usage Q&A
- Topic: Stilo service reset
- Replies: 2
- Views: 2246
Re: Stilo service reset
I think this is probably a Support Vehicles documentation error. On the last *free* version of FiatECUScan (V1.6) this *may* have been supported (as was the Fiat Croma Oil Change Reset). MultiECUScan V1.0 introduced CAN support and the 1st non free function support which is generally all CAN based m...
- 25 Sep 2013, 09:22
- Forum: Usage Q&A
- Topic: punto grande 1.3tjd
- Replies: 6
- Views: 4358
Re: punto grande 1.3tjd
I've never seen the aerial coil on a Punto. It is either attached to the back of the cowling you took off or is located around the key barrel. Probably a moulded ring or other 'block' with wires attached. Sorry I can't be more specific. PLEASE NOTE! ALWAYS disconnect the car battery terminals and le...