Multiecuscan

I have run both FiatECUCan and MultiECUSCan (MECUS) on the MS Win Vista and Win 7 platform with no problems.

As you say you have to use msconfig to successfully run MECUS then clearly there is another program interfering with MECUS.

Solving this could be easy or difficult..........

I think this is probably a Support Vehicles documentation error. On the last *free* version of FiatECUScan (V1.6) this *may* have been supported (as was the Fiat Croma Oil Change Reset). MultiECUScan V1.0 introduced CAN support and the 1st non free function support which is generally all CAN based m...

I've never seen the aerial coil on a Punto. It is either attached to the back of the cowling you took off or is located around the key barrel. Probably a moulded ring or other 'block' with wires attached. Sorry I can't be more specific. PLEASE NOTE! ALWAYS disconnect the car battery terminals and le...

Yes this is an immobiliser issue. The Key Code Unit / ECU are not recognising your key. Common causes for this are: 1) Key security chip failure - have you tried another key 2) Aerial failure - there is a special pickup aerial cold around/behind the ignition key slot - these have been known to have ...

Email support@multiecuscan.net

I'm a Gendan ELM unit user with both their software and FiatECUScan and now MultiECUScan.

I have no issues on the cars I try to connect to.

Check your MultiECUScan install directory. You should find one or more log files that will hopefully shed a little light on you connection problems.

According to the Supported Vehicles list (http://www.multiecuscan.net/SupportedVehiclesList.aspx) your Ducato is supported and the support INCLUDES Parking Control. I've looked at the Parking Control and the only Adjustment possible is "Enable/Disable the presence of tow hook on vehicle." Detailed i...

This ECU comes from Alfa X1 156 MY 2002, T7 156 BENZINA (1997-2002) and T8 156 TD.ID (1997-2002)

If you can locate and electrical wiring diagrams for a Alfa 156 then you will be able to get the pin numbers ok.

I have an licence for max. ver. 1.4 und the car is 2006, so I must buy a new licence... I won´t pay again for a funtion that is offerd with my version and how should I know that the version 1.6 will work ? I understand that problems in software are normal, but not with cars that 7 years old. Roland...

Have you tried Version 1.6 (current version) of MultiECUScan? If not then I suggest you try this version whilst waiting for a support reply. It is important to take advantage of all free updates whenever they appear. This will ensure that you have the latest version when your free update period come...