Multiecuscan

http://www.digikey.com/catalog/en/partgroup/obd-and-obd-ii-series/28997?mpart=0511151601&vendor=900&WT.z_ref_page_type=PS&WT.z_ref_page_sub_type=PD&WT.z_ref_page_id=PD&WT.z_ref_page_event=DC_Link_Table https://www.sparkfun.com/products/9911 http://www.amazon.co.uk/OBDII-Extension-Female-Diagnostic-E...

I've raised a request for this in the Support Forum.

Plate under the bonnet and possibly under the carpet through a lift up inspection flap. For security reasons I suggest you send me a personal message with the VIN number. I can than look this up and tell you interesting stuff like what year and month your car was manufactured. And before anybody ask...

Well for anybody to be precise we we need the vehicles actual model code / chassis number. You can post your full chassis number here *LESS* the last 8 digits (for security/privacy) or you can PM me your full chassis number and I will also be able to give you much additional information about you ca...

Well as you say year 2006 then it should be the Grande Punto. You don't give much info (like engine size (1.2 or 1.4), or model code e.g 199.133) so it is hard to be certain. However MES does support Fiat Grande Punto 1.2 & 1.4 8V engines (check the table for yourself looking for Grande Punto and no...

Have a look at this:

http://answers.microsoft.com/en-us/wind ... b51?auth=1

According to the supported vehicles list http://www.multiecuscan.net/SupportedVehiclesList.aspx then the Alfa 147 1.9JTD 16v 2002 engine ECU support is available in the free version. You should find that the ELM interface will work OK as this engine is the same fitted to the Croma 2005 and I had no ...

roberz147 wrote:Ciao , come e dove si scaricano gli aggiornamenti ? v 2.8 .

Tutti i download si trovano sulla home page del sito.


http://www.Multiecuscan.NET/

Resetting the Oil Change should not require any "conditions".

Are you sure you are trying to do the correct thing?

What vehicle and engine is it?

I'll have a look on my MES.

Look at the supported vehicles page

http://www.multiecuscan.net/SupportedVehiclesList.aspx

Contains all the info you need.

Also MES will prompt for the correct adaptor.