Search found 825 matches
- 09 Sep 2023, 07:22
- Forum: General
- Topic: coding ducato
- Replies: 2
- Views: 2172
Re: coding ducato
You code injectors to cylinders (1,2,3,4) and not by firing order.
- 21 Aug 2023, 16:40
- Forum: Usage Q&A
- Topic: No vin or year?
- Replies: 6
- Views: 3796
Re: No vin or year?
Don't forget todo the Engine ECU Oil Change Reset if you have a DPF fitted. This is separate / additional to the normal Service Reset.
- 21 Aug 2023, 08:57
- Forum: Usage Q&A
- Topic: Custom proxy Alfa Romeo 159 and 5 digits code
- Replies: 1
- Views: 2442
Re: Custom proxy Alfa Romeo 159 and 5 digits code
Generally you only need the 5 digit security code when:
1) Key / Remote Programming
2) Alarm changes - e.g. country, how lights flash, etc.
1) Key / Remote Programming
2) Alarm changes - e.g. country, how lights flash, etc.
- 20 Aug 2023, 17:10
- Forum: Usage Q&A
- Topic: No vin or year?
- Replies: 6
- Views: 3796
Re: No vin or year?
So a Ducato 2014+
Probably a 290 or 295. Can't be sure.
Did you check the Vehicles Supported List I advised you to do. MES support the 290 versions so select Ducato 290 and your engine and see where you get with a Scan and actually trying to connect to once of the vehicles ECUs/Nodes.
Probably a 290 or 295. Can't be sure.
Did you check the Vehicles Supported List I advised you to do. MES support the 290 versions so select Ducato 290 and your engine and see where you get with a Scan and actually trying to connect to once of the vehicles ECUs/Nodes.
- 20 Aug 2023, 07:22
- Forum: Usage Q&A
- Topic: No vin or year?
- Replies: 6
- Views: 3796
Re: No vin or year?
VIN reading is not supported on all vehicles. Only later ones. If you have your VIN code then the first 3 digits tell you what your model is. See: https://www.vindecoderz.com/EN/Fiat/DUCATO You can then work from there by using the Vehicles Supported List here on MES site or you can select your Duca...
- 13 Aug 2023, 16:23
- Forum: Usage Q&A
- Topic: 500x sgw brake service
- Replies: 4
- Views: 3040
- 12 Aug 2023, 19:59
- Forum: Usage Q&A
- Topic: 500x sgw brake service
- Replies: 4
- Views: 3040
Re: 500x sgw brake service
If you have an SGW then basically ALL write/command modes are filtered out / blocked. However you can manually release the parking brake and then disconnect the battery to ensure it can not be engaged again. This will allow you to remove the caliper and brake pads etc. If you web search the you will...
- 07 Aug 2023, 07:41
- Forum: Usage Q&A
- Topic: Re install
- Replies: 1
- Views: 1400
Re: Re install
Is the Hardware Key actually the same? Did you note it down when you installed MES originally?
Whilst MES mentions "Hardware Key" this may be affected by OS removals/installs.
Suggest you contact MES Support your license key, current harware key and any purchare proof you have.
Whilst MES mentions "Hardware Key" this may be affected by OS removals/installs.
Suggest you contact MES Support your license key, current harware key and any purchare proof you have.
- 03 Aug 2023, 16:19
- Forum: General
- Topic: Where from and how to : MultiEcuScan read mileage
- Replies: 4
- Views: 2092
Re: Where from and how to : MultiEcuScan read mileage
Well just connect to each of the nodes (e.g. ecu, service, abs, etc) and see if mileage is a listed parameter.
- 02 Aug 2023, 20:42
- Forum: General
- Topic: Where from and how to : MultiEcuScan read mileage
- Replies: 4
- Views: 2092
Re: Where from and how to : MultiEcuScan read mileage
The only mileage of significance is that from the Instrument Cluster Odometer. This is the one unit which has to be legally compliant / homologated etc. Other units like engine ECU, ABS also have mileage figures but as has been shown / commented on in the past these figures may not match the vehicle...