Search found 831 matches

by s130
10 Mar 2016, 16:58
Forum: Usage Q&A
Topic: Proper execution of the "oil change" procedure
Replies: 5
Views: 6287

Re: Proper execution of the "oil change" procedure

I need to correct my previous post. What I meant to say is that MES talks of "Oil Degradation" and then says 100% is 100% good and 0% degraded Yes I've done it several time. On the times I recorded any numbers I had: Before reset: oil degradation was 40% with 20,500km remaining Before reset: oil deg...
by s130
09 Mar 2016, 15:44
Forum: Usage Q&A
Topic: Proper execution of the "oil change" procedure
Replies: 5
Views: 6287

Re: Proper execution of the "oil change" procedure

On the Fiat Croma 1.9MJet the oil quality is actually measured/reported as a degradation which is very confusing!

So 100% degraded is actually new fresh oil
and 10% degraded would be 90% bad
by s130
23 Feb 2016, 10:51
Forum: General
Topic: Exclusion EGR valve exchanger
Replies: 3
Views: 2682

Re: Exclusion EGR valve exchanger

Tonino88 wrote:It can therefore not be excluded with this program
Correct
by s130
22 Feb 2016, 17:12
Forum: General
Topic: Exclusion EGR valve exchanger
Replies: 3
Views: 2682

Re: Exclusion EGR valve exchanger

MES can not do ECU mapping / code modification changes, e.g. to map out/turn of EGR.

Only exception to this would be with proxy aligned CANBus based modules, e.g. parking sensors, etc.
by s130
22 Feb 2016, 11:17
Forum: Bugs
Topic: MES crashing since v2.2
Replies: 2
Views: 3520

Re: MES crashing since v2.2

Install MES on the new laptop and make a note of the hardware key.

Write to MES support with details of your original license purchase, old hardware & registration code and the new hardware code/key.

Support should sent you back a new registration code for the new installation.
by s130
14 Feb 2016, 22:32
Forum: General
Topic: does it or doesn't it?
Replies: 2
Views: 2162

Re: does it or doesn't it?

May I suggest you try the free version of MES and do a scan to obtain all the reported vehicles nodes/modules and ISO codes.

Armed with the reported ISO identification codes then we may be in a better position to advise further.
by s130
14 Feb 2016, 11:04
Forum: Usage Q&A
Topic: software for apple mac
Replies: 2
Views: 4423

Re: software for apple mac

Running MES natively on a MAC is not possible. Booting a Windows operating system (bootbamp ?) and using MES *may* be possible although there may be USB/COM issues (I've seen references to these on various forums). Running Windows under a VM (Virtual Machine) is not really a option. I have experienc...
by s130
10 Feb 2016, 19:05
Forum: Usage Q&A
Topic: Multiecuscan 2.9 registered, no Adjustment tab
Replies: 2
Views: 2578

Re: Multiecuscan 2.9 registered, no Adjustment tab

Exactly what vehicle are you trying to use MES on.

Make = ?
Model = ?
Version = ?
by s130
10 Feb 2016, 10:07
Forum: Usage Q&A
Topic: my registration has expired !
Replies: 1
Views: 1940

Re: my registration has expired !

Email support@multiecuscan.net including as much information about your purchased license but *before* so *please* read what follows otherwise you will be wasting your time and MES support's time unnecessarily. FYI as a general rule of thumb people who bought the original FiatECUScan had lifetime li...
by s130
02 Feb 2016, 15:46
Forum: General
Topic: Multiecuscan 2.8 Released!
Replies: 8
Views: 7952

Re: Multiecuscan 2.8 Released!

what is new in 2.9 release? 19/01/2016 - MULTIECUSCAN 2.9 - Added information for more ISO codes from 2012-2015 vehicles - Support for Magneti Marelli IAW 59F Injection (Punto Mk2, Palio, Doblo) - Support for Bosch Motronic M2.7 Injection (E.Key) (Punto GT, K) - Support for Bosch Motronic M2.7 Inje...