Multiecuscan

The Alfa 159 is well supported by MES. See/look for your specific model here: https://multiecuscan.net/SupportedVehiclesList.aspx For the 'TRW My 03' Airbag and most other systems you only need the ELM / OBDLINK SX interface cable and the software. If you want to cover the ABS system then adapter A1...

Replacing sensors at 10 years is probably a good idea. Have you tried: 1. Check all tyre pressures and set levels and the use MES to records all the Parameters 2. Remove one wheel and take it well away from the car 3. Do Parameter checks again. One wheel should now be missing. Did this wheel come fr...

I'm not sure what you are asking?

MES has connected to the Airbag ECU and is showing a Error Code?

What is the Error Code and what decription does MES give for the error?

Have you tried to CLEAR the error?

Also have you checked the Parameters looking for wrong / different values?

Please try to post in English. Use a web translator if you can't post directly in English.

Suggest you send and Email to MES Support.

Swopping wheels over with Active TPMS Sensors will not change the indicated location as the wheels are coded as front left, front right, rear left and rearch right. Well this my understanding.

If MES is saying P1304=pilot injection learning then I assume MES is using the correct code description for your vehicle/Ducato. The code discription I quoted was from a Fiat generic list of codes. Did you replace the injectors at some point in time? It could be that the ECU is not happy with the co...

Please try and post in English. Use Google or other translation sites. Your said: Hello everyone. Fiat ducato 250 Ecu Visteon engine. Mil light on the dashboard and fault code P1304 with MES impossible to clear. Thanks for your help. Code P1304 is P1304 = EGR Calibration High Check for EGR faults Se...

Has anybody checked the vehicle's Owner's Handbook?

Any TPMS functions / displays should be documented there, be that for Active or Passive TPMS.

18/11/2023 - Multiecuscan 5.2 - Added "parameter filter" functionality - In Parameter's screen you can hold SHIFT key and type text to filter parameters by name. For example press SHIFT and type "temperature" and all parameters with word "temperature" will be displayed on top. - Added possibility fo...