Multiecuscan

Contact CanTieCar support and ask them. If not they may have an cheeper upgrade offer for you.

I'm not a CanTieCar user or expert but I gather the devices firmware can be updated to support other stuff and correct previously know problems.

Suggest you investigate this course of action.

On some later Fiats a Security Gateway Module (SGW) is fitted. This is connected somewhere in line between the EOBD port and the Engine and some other ECUs. Its purpose is to block WRITE EOBD commands unless a vehicle specific security code is is fitted. An SGW Bypass is a plug which one inserts in ...

You code injectors to cylinders (1,2,3,4) and not by firing order.

Don't forget todo the Engine ECU Oil Change Reset if you have a DPF fitted. This is separate / additional to the normal Service Reset.

Generally you only need the 5 digit security code when:

1) Key / Remote Programming
2) Alarm changes - e.g. country, how lights flash, etc.

So a Ducato 2014+

Probably a 290 or 295. Can't be sure.

Did you check the Vehicles Supported List I advised you to do. MES support the 290 versions so select Ducato 290 and your engine and see where you get with a Scan and actually trying to connect to once of the vehicles ECUs/Nodes.

VIN reading is not supported on all vehicles. Only later ones. If you have your VIN code then the first 3 digits tell you what your model is. See: https://www.vindecoderz.com/EN/Fiat/DUCATO You can then work from there by using the Vehicles Supported List here on MES site or you can select your Duca...

rhett71 wrote: ↑

12 Aug 2023, 21:13

Unfortunately that is what I thought, it seems a bit poor that my Alfa Stelvio has it fitted for everyone to see and yet the 500X has no option at all for a home DIYer!!

Not sure I understand what you are saying? Please expand.

If you have an SGW then basically ALL write/command modes are filtered out / blocked. However you can manually release the parking brake and then disconnect the battery to ensure it can not be engaged again. This will allow you to remove the caliper and brake pads etc. If you web search the you will...