Multiecuscan

Yes.

Write to MES Support with as much info as you have e.g.

Purchase date etc
Previous key info etc.
New hardware key

I'm not an expert but I'm pretty sure the injectors are dumb. They just open and close to the signal from the ECU. The coding itself is just a correction value for each injector as for any given injection signal no injector will deliver the same amount of fuel. It could be that the correction code v...

See: https://www.multiecuscan.net/ReleaseHistory.aspx

Usually all additions, features, updates etc. are documented here.

From experience with Windows software that IO have developed that uses/requires fast USB connection then running under VMs or with Emulators can be a real problem. MES is a .NET application so in/for Parallels you have to have the .NET runtime libraries as well. If I were you I would use BOOTCAMP an...

Have you looked here: https://www.multiecuscan.net/SupportedVehiclesList.aspx

Kolya07111 wrote: ↑

03 Apr 2023, 16:24

I am using ESP32-WROOM with AT commands. When I send CWJAP command with wrong password, the module responds with error code 4 instead of 2, I whant to know why this is happening.

Could you help me with this?

Thanks

Can you explain wahat or how this post is related MES?

On the 500X B0101-16 is a follows: DTC\ORC6_Occupant_Restraint_Control(BOSCH)_EMEA\ --> Power Supply - Circuit voltage below threshold B0101-16 Check the battery charge Check for the presence of oxidised or corroded terminals on the battery connectors Check battery wiring correct continuity Check co...

Should work OK.

Regressions can sometimes happen.

You can create a log report for MES support.

After it/you disconnect there is a PDF button net to the Simulate button on the home screen. These is also a log file in the program's directory. Check this for any errors.

I asmume you have seen/checked the supported vehicles list here: http://www.multiecuscan.net/SupportedVehiclesList.aspx Your results seem a little odd as you think your are Ducator Type 250 3.0 Multijet and for this vehicle everything (except power steering) is CAN based. I presume you have the requ...

See: http://www.multiecuscan.net/SupportedVehiclesList.aspx

Looks like A3 = YELLOW