Multiecuscan

This is how Service Coupons work on the Fiat Croma and Fiat Stilo Abarth. I assume they work the same across most modern Fiat & Alfa cars. The Service Coupn Counter starts at 9 and every time the car is given a Service Reset then the counter is decreased by 1 and the next service date/mileage is inc...

Yes you can modify both the ELM and KKL interfaces with small DIP switches instead of using adapter cables. The wiring connection details can be seen here: http://www.multiecuscan.net/SupportedVehiclesList.aspx (on the right of the page) I have done this a long time ago BUT over time the required nu...

GENERIC Passenger-Side Air Bag Circuit High Input

sgorchichko wrote: Should I totally remove the resistor without putting any connection between these pins?

YES. Just remove the resistor and do not put anything back in its place.

So you are querying the 'e' between the two Odometer fields?

Sorry I thought in your original post the e was a typing error

I don't see this 'e'.

What vehicle are you connecting to?

I'm not 100% certain but I suspect that if your odometer reads 50,000km and you use a tool to change it to 50,010km then the odometer last programming value will change to 50,000km.

This make logical sense but I have no idea if it actually does this.

Yes, according to http://www.multiecuscan.net/SupportedVehiclesList.aspx

Thanks for the clarification.

Come to think of I now recall having Yani reply to me long ago on this. Just totally forgot.

My apologies to all.

Yes any more info on this, especially if you already have a lifetime MES license can you buy just the interface from Yani and they will work together and continue to get lifetime upgrades?

There could be screws that hold the two halves of the case together underneath the label. Run your finger firmly over the label feeling for round depressions. Failing that then it is probably a 'snap-together' case which will require careful prising apart. You MUST check for screws below the label f...