Multiecuscan

I found this link which shows which ECUs connect with or without the Can Bus:-
http://www.carlogic.org/bg/document/eweb/fiat.pdf
It also shows what can be done with the diffrent ECUs.
Regards ~ Chris.

Hi, I have an update which may help others on this forum, (which incidentally is the best one I have ever been on). My OBD Plug had the pins numbered wrongly and so I had wired my DIP switch incorrectly. The correct numbering is as follows:- As you look at the soldered pins side of the socket where ...

Hi all. Is there anyone that has succesfully connected via ELM327 a Panda 1.2 8V 2004 to all ECUs or at least to the Power Steering and ABS. I have modified my unit to run at 38400 Baud and can only see the Engine ECU under scan. I have modified the OBD connector with a dip switch to swith pins 1 3 ...

Ifound this and it is a complete description of how the ELM interface works:-
http://www.elmelectronics.com/DSheets/ELM327DS.pdf
Note the section on baud rate.
Regards ~ Chris.

Hi warma,
This may be helpful. I have a Panda 1.2 8V 2004 and can connect ok with FES using an ELM327 1.2a but only at 9600 baud.
I cannot connect to the ABS or Power Steering because they are on the C-CAN and I am using the free version of FES which does not support C-CAN.
Regards ~ Chris