Search found 831 matches
- 10 Mar 2016, 16:58
- Forum: Usage Q&A
- Topic: Proper execution of the "oil change" procedure
- Replies: 5
- Views: 6288
Re: Proper execution of the "oil change" procedure
I need to correct my previous post. What I meant to say is that MES talks of "Oil Degradation" and then says 100% is 100% good and 0% degraded Yes I've done it several time. On the times I recorded any numbers I had: Before reset: oil degradation was 40% with 20,500km remaining Before reset: oil deg...
- 09 Mar 2016, 15:44
- Forum: Usage Q&A
- Topic: Proper execution of the "oil change" procedure
- Replies: 5
- Views: 6288
Re: Proper execution of the "oil change" procedure
On the Fiat Croma 1.9MJet the oil quality is actually measured/reported as a degradation which is very confusing!
So 100% degraded is actually new fresh oil
and 10% degraded would be 90% bad
So 100% degraded is actually new fresh oil
and 10% degraded would be 90% bad
- 23 Feb 2016, 10:51
- Forum: General
- Topic: Exclusion EGR valve exchanger
- Replies: 3
- Views: 2682
Re: Exclusion EGR valve exchanger
CorrectTonino88 wrote:It can therefore not be excluded with this program
- 22 Feb 2016, 17:12
- Forum: General
- Topic: Exclusion EGR valve exchanger
- Replies: 3
- Views: 2682
Re: Exclusion EGR valve exchanger
MES can not do ECU mapping / code modification changes, e.g. to map out/turn of EGR.
Only exception to this would be with proxy aligned CANBus based modules, e.g. parking sensors, etc.
Only exception to this would be with proxy aligned CANBus based modules, e.g. parking sensors, etc.
- 22 Feb 2016, 11:17
- Forum: Bugs
- Topic: MES crashing since v2.2
- Replies: 2
- Views: 3520
Re: MES crashing since v2.2
Install MES on the new laptop and make a note of the hardware key.
Write to MES support with details of your original license purchase, old hardware & registration code and the new hardware code/key.
Support should sent you back a new registration code for the new installation.
Write to MES support with details of your original license purchase, old hardware & registration code and the new hardware code/key.
Support should sent you back a new registration code for the new installation.
- 14 Feb 2016, 22:32
- Forum: General
- Topic: does it or doesn't it?
- Replies: 2
- Views: 2163
Re: does it or doesn't it?
May I suggest you try the free version of MES and do a scan to obtain all the reported vehicles nodes/modules and ISO codes.
Armed with the reported ISO identification codes then we may be in a better position to advise further.
Armed with the reported ISO identification codes then we may be in a better position to advise further.
- 14 Feb 2016, 11:04
- Forum: Usage Q&A
- Topic: software for apple mac
- Replies: 2
- Views: 4427
Re: software for apple mac
Running MES natively on a MAC is not possible. Booting a Windows operating system (bootbamp ?) and using MES *may* be possible although there may be USB/COM issues (I've seen references to these on various forums). Running Windows under a VM (Virtual Machine) is not really a option. I have experienc...
- 10 Feb 2016, 19:05
- Forum: Usage Q&A
- Topic: Multiecuscan 2.9 registered, no Adjustment tab
- Replies: 2
- Views: 2579
Re: Multiecuscan 2.9 registered, no Adjustment tab
Exactly what vehicle are you trying to use MES on.
Make = ?
Model = ?
Version = ?
Make = ?
Model = ?
Version = ?
- 10 Feb 2016, 10:07
- Forum: Usage Q&A
- Topic: my registration has expired !
- Replies: 1
- Views: 1941
Re: my registration has expired !
Email support@multiecuscan.net including as much information about your purchased license but *before* so *please* read what follows otherwise you will be wasting your time and MES support's time unnecessarily. FYI as a general rule of thumb people who bought the original FiatECUScan had lifetime li...
- 02 Feb 2016, 15:46
- Forum: General
- Topic: Multiecuscan 2.8 Released!
- Replies: 8
- Views: 7952
Re: Multiecuscan 2.8 Released!
what is new in 2.9 release? 19/01/2016 - MULTIECUSCAN 2.9 - Added information for more ISO codes from 2012-2015 vehicles - Support for Magneti Marelli IAW 59F Injection (Punto Mk2, Palio, Doblo) - Support for Bosch Motronic M2.7 Injection (E.Key) (Punto GT, K) - Support for Bosch Motronic M2.7 Inje...