Multiecuscan

Hello LukasCA Even without modification you should be able to connect to the engine control unit with the interface. The resistor may only cause problems for CAN bus controllers. And the motor control of the 159 is not read via CAN bus. Which driver was installed You have established all the setting...

Nevermind, it started working by itself today. And you actually do need the purple adapter if you have Xenon lights to access the Xenon module. Just a tip if anyone sees this in the future. Hello This is unfortunately wrong with the purple adapter For the 159, the Xenon control is on pin 12 And thi...

Hello It is already right as it is written. For your 159 you need with this interface Only for ABS and Xeonon an adapter This interface does not have a bridge resistor either Only the green adapter The purple adpater you do not need You have this information from AlfaOBD? There the adapter specifica...

Hello Marianbatu The blue (KKL interface) is not suitable for your Grandepunto Since these interfaces are not CAN bus capable. In usb or BT version? http://www.ebay.de/itm/152303738760?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT http://www.ebay.de/itm/152303739535?_trksid=p2055119.m14...

Hello Marianbatu

Check times the Resistor R34, this should have 120 ohms?
Then this is the bridge resistor!

But this alone does not have to do with the display of this interface
Compatible with MES.

Greeting Eddy

Hello

That was easy
Correct R04 is the resistor

It has also been described several times

For which vehicle or control is the interface required?
This can play a role

Greeting Eddy

Hallo Das sollte passen nur weiß ich bei diesem Angebot nicht ob ein Brückenwiderstand nicht die CAN Bus Protokolle behindert. Aber bei diesem Angebot http://www.ebay.de/itm/152303738760?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT bin ich sicher das es funktioniert. Gruß Eddy

Hallo Da ja fast alle ELM die am offenen Markt zu kaufen sind chinesische Kopien sind. Und auch die Chinesen diese immer weiter Entwickeln ist es leider dazu gekommen das die meisten ELMs die seit knapp 2 Jahren angeboten werden nicht mehr mit Multiecuscan oder auch AlfaOBD kompatibel sind. Wenn es ...

REPLICA wrote:Hello Eddy,

it is number 121. Should be this one?

Thank you

Yes


Greetings Eddy

Hello Replica

Because your picture is very bad
And little is visible.

I can only rate it

R2 ????

What number is on R2 ?????


Greeting Eddy