Multiecuscan

Hello This is very strange ???? At the interface it is not. Since it has worked with your old laptop. The bridge resistor (R4) is not available. What driver did you use? Please use this, http://www.ftdichip.com/Drivers/VCP.htm Has your laptop only 3.0 usb Mine also has 2.0 ports Although I do not be...

Hello Boblelie https://drive.google.com/open?id=0B1IA_uUNW68nRm9CSmpYRnBlVHM Sorry this ELM no works with MES :( Greetings Eddy Hi Eddy, Thx for your feedback. sucks monkey balls though .... :( can you recommend a elm327 clone (preferred bluetooth) that will work, or will work after some modificati...

Hello Yes this has been written many times The few v1.5 work with MES has to do with it Some vendors have a version between v1.4 to v1.5 on the chip In the interface. And this was the beginning with MES Following v1.5 versions. Once again for all who read this here As soon as the interface shows the...

Hello

No, unfortunately, no chance
Since version v1.5 is a purely Chinese variant.
This version never existed from ELM elektronics

Greeting Eddy

Hello All! I have Fiat Stilo 2005/06 1,4 16V, and i try to connect via OBD but i cannot access, only to Engine module. I used Multiecusan and "CHX" OBD BT. I would like to read climate control module. During contection test Multiecusan says this adapter is not access to CAN modules. Hera are some p...

Hello Boblelie

https://drive.google.com/open?id=0B1IA_ ... mpYRnBlVHM

Sorry this ELM no works with MES

Greetings Eddy

Hello

Try again with other baud settings!

But probably the V1.5 ELM will not work with MES.

For the v1.5 it is very different some work different unfortunately not

Greeting Eddy

Hello I'm trying to give you answers, even though your questions should be the Mod or Yani. To 1st currency differences ?? To 2. I am no Mod or Admin here, but I think times bought is bought, and why should the reading with your Suzuki not work? In other vehicles it is also To 3. Therefore, I have y...

Hello
Ok then reading should be possible.

To know what to read in the ABS.
Download Multiecuscan in the free version and
Make a simulation with the ABS of your model

Greeting Eddy

Hello Yes this resistance is the problem with Multiecuscan and Italian vehicles But this also only for older vehicles and also only for the CAN bus protocol Again, I think you have not understood it yet With Multiecuscan you can not read Mazda does not fit This is what you will surely notice if you ...