Multiecuscan

The thread written in this thread
Has nothing to do with a Mazda or other car models

Yes i ve seen, alfaeddy, but i don't know which is the 1.5 version that works. A seller told me should be ok with multiecuscan, so i bought a v.1.5, unfortunately the shipping were lost, so i bought another one (random, on ebay). But no interface founded with Mes, with scanmaster, odbsomething, dig...

Hello

I have to write it again and again!
Most v1.5 ELM interfaces do not work with MES

Make a screen and you can see if this interface works with MES.

Because the interface test is also positive, even if a bridge resistor (120 Ohm) is installed.


Greeting Eddy

Hello Galt This older version is hard to get. V1.3 or v1.4 Yani probably converted the software, which can now also v2.1 be used but I have not tested it yet. This ELM is OK but which version is this I do not know http://www.ebay.de/itm/152303739535?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEB...

Hello Galt

I thought it already this interface is not compatible with MES and also AlfaOBD

There are only a few v1.5 ELM interfaces that work.

This has nothing to do with a bridge resistor.


Greeting Eddy

Hello Galt

Make an Interface Test with Multiecuscan
and post an Screen with an Image

On your Board can´t find an Bridge Resistor

the Motor ecu ist read not with CAN Bus
Also your connect must with no one modifikation

Greetings Eddy

Hello

The injector coding must be made with a KKL interface.
Programming is not done with the ELM interface


Greeting Eddy

Hello

The injector coding must be made with a KKL interface.
Programming is not done with the ELM interface

Which model is it?

Greeting Eddy

Hello

@ obdspecalist

This one also

http://www.ebay.de/itm/152303738760?_tr ... EBIDX%3AIT


and to an better price

Greeting Eddy

Hallo

It is the Resistor R1 with the Number 121


´Greeting Eddy