Multiecuscan

Hi Yani,
maybe you could include the value for the current engine torque calculated from the ECU.

Another item would be to switch off the seat-belt-reminder sound (SBR) on Alfa 159 BC.

Great Software so far, and I will purchase a license soon.

Bye tomsa.

hi, to all. if anyone of you edc16cf16 fellows want to tune there great jtd engine I will support you by a little donation. NO EGR - no jerking, less fuel consumption, more power - until your clutch will die.


have fun.

for anyone who has edc16cf4 I can offer egr shut off for a little donation.

hi Cwx,
the 1260 tool works great for my diesel edc16c39 ecu. i can read out original file, reprogramm, what ever you want, an flash back. send me your original file, tell me what you want, and for a littel donation i give the modified file ; try it.
bye tomsa

Hi, I do not know iaw5nf. I know only the diesel ECUs EDC16 EDC17. Here you download the file from the ECU, do your remapping and flash back the modified file. The immo code stored in the original file won't be touched. Maybe you should look around at chiptuners.org or so to find out about iaw5nf. bye

For remapping you must have a tool to read the ecu eeprom such as EOBD1260 which you can buy in the bay. Then you have to modify the Maps and write back the bin-file to the ECU with the tool I mentioned above. For my car (Alfa 159 EDC16/CF4) it works perfect.

bye
Tom

hi, great sources are chiptuners.org for map locations and digital-chaos for SW. The rest is know-how(I'am professional) and hard work.

bye
Tom

hi, yes you are right. I general there are at least two ways to shutt off EGR.First you can apply high values to the air-desired map, lets say for the 1.9 jtd about 1200 mg/cyc. So the EGR is closed and you have to edit a second map for the air mass deviation. Here you apply values about 1000mg/cyc ...

hi, I have the same engine with the same ECU and I use exactly the tool you find on the bay. You have to read out the eeprom with the software which comes with the tool (EOBD1260). It takes about 45 min, so be sure your batteries (laptop and car) are in top condition. Then you have to modify the bin...

At least you must have a tool to read the ecu eeprom such as EOBD1260 which you can buy in the bay. Then you have to modify the EGR Map and write back the bin-file to the ECU with the tool I mentioned above. For my car (Alfa 159 EDC16/CF4) it works perfect.

bye
Tom