Search found 616 matches

by s130
03 Aug 2020, 07:00
Forum: Usage Q&A
Topic: Fiat Ducato MultiJet - Finding the right model
Replies: 1
Views: 11

Re: Fiat Ducato MultiJet - Finding the right model

Use the 290 model version and see how you get on. Hopefully you will get a valid ISO code. If not I think you should still be able to proceed on either the 250 or 290 model selection BUT I WOULD NOT attempt a PROXI alignment procedures with invalid ISO codes just to be on the safe side.
by s130
31 Jul 2020, 20:03
Forum: Bugs
Topic: SELESPEED CFC319 CF6 Automatic Gearbox (500 Abarth, 500L, Fiorino, Qubo)
Replies: 3
Views: 51

Re: SELESPEED CFC319 CF6 Automatic Gearbox (500 Abarth, 500L, Fiorino, Qubo)

Do you have / you should have a log file in the MES directory that you can send to MES Support.
by s130
31 Jul 2020, 07:05
Forum: Usage Q&A
Topic: Alarm memory Lancia Thesis
Replies: 1
Views: 18

Re: Alarm memory Lancia Thesis

Limited functions are available if you connect to the Body Computer.
by s130
28 Jul 2020, 06:55
Forum: Usage Q&A
Topic: About Vag com k line cable
Replies: 6
Views: 101

Re: About Vag com k line cable

With that switched unit you DO NOT need any adapter cables.

The switch does the pin change over for you.
by s130
27 Jul 2020, 14:48
Forum: Usage Q&A
Topic: About Vag com k line cable
Replies: 6
Views: 101

Re: About Vag com k line cable

|INFO| - Identification data reading is supported on the module |DTC| - Error codes reading and clearing is supported on the module |DTC EX| - Error code details reading is supported on the module |PRM| - Parameter reading is supported on the module |ACT| - Actuator functions are supported on the mo...
by s130
27 Jul 2020, 07:35
Forum: Usage Q&A
Topic: About Vag com k line cable
Replies: 6
Views: 101

Re: About Vag com k line cable

Look here: http://www.multiecuscan.net/SupportedVehiclesList.aspx You will see that you can only connect to Engine, ABS and Airbag systems. The dashboard and other units are not supported. However a VAG / KKL interface is all you need for connecting to the engine PLUS adaptors A1 and A2 if you want ...
by s130
06 Jul 2020, 09:07
Forum: General
Topic: Cantiecar and Multiecuscan 4.6R1
Replies: 1
Views: 108

Re: Cantiecar and Multiecuscan 4.6R1

Not sure that you are at fault.

I suspect your Cantiecar interface may need a firmware update? The 500X was a new Fiat model that require a new A6 adapter.

Suggest you contact Cantiecar (http://www.tiecar.net/) directly and ask for clarification.
by s130
03 Jul 2020, 20:52
Forum: Usage Q&A
Topic: Novus old block user
Replies: 3
Views: 116

Re: Novus old block user

Yes please let us know how you get on. I've personally encountered cases where and ELM interface will not connect but a KKL one will. I'm not going to suggest that the ELM compatibility information is wrong but more that sometimes one interface is more "picky/temperamental" than another. This usuall...
by s130
03 Jul 2020, 08:25
Forum: Usage Q&A
Topic: Novus old block user
Replies: 3
Views: 116

Re: Novus old block user

Your Alfa ideally wants the KKL (VAG KL) interface. If you are using an ELM device then you will only be able to connect to some units and even then depending on the ELM interface you may have problems.

Connection to WiFi is not required.
by s130
01 Jul 2020, 07:42
Forum: General
Topic: Delete my account
Replies: 1
Views: 127

Re: Delete my account

Hi MissElectric. As only a humble moderator I can not delete your account but I think Yani could. I know that periodically Yani purges all the "Banned" accounts. So what I can do is to ask you to change your password to a VERY VERY secure PW (some 30 random characters) and then send me a PM. I will ...