Search found 454 matches

by s130
18 Feb 2018, 12:49
Forum: Usage Q&A
Topic: Reference parameters
Replies: 1
Views: 8

Re: Reference parameters

Look here:

http://www.multiecuscan.net/SupportedVehiclesList.aspx

Search for Lancia Musa 1.3

Here you will see what is required. An ELM or OBDLink with adapter A1 seems to be all that is required PLUS the basic MES software license.
by s130
15 Feb 2018, 17:08
Forum: Usage Q&A
Topic: VAG KKL cable connections
Replies: 171
Views: 201492

Re: VAG KKL cable connections

The Alfa Mito ECU's/Nodes are all CAN Bus units. The KKL diagnostic cable you have will not work.

You need and ELM or OBDLink diagnostic cable.

See http://www.multiecuscan.net/SupportedVehiclesList.aspx
by s130
14 Feb 2018, 17:26
Forum: Usage Q&A
Topic: Fiat 500: Disable 2nd stage of driver airbag
Replies: 1
Views: 25

Re: Fiat 500: Disable 2nd stage of driver airbag

MES in the parameters tab will show you the 1st stage and 2nd stage air bag resistance for driver and passenger. MES (for safety reasons) will not allow you to adjust/disable or modify airbag system parameters. I don't think even the official Fiat dealer level diagnostics permit the changing of airb...
by s130
09 Feb 2018, 18:11
Forum: Usage Q&A
Topic: Plate light error disabling?
Replies: 2
Views: 15

Re: Plate light error disabling?

No MES can not clear this.

You need LED bulbs that are compatible with the vehicles "bulb failure detection system". The are almost always *INCORRECTLY* referred to a CAN compatible LEDs.
by s130
09 Feb 2018, 18:07
Forum: Usage Q&A
Topic: Diagnostic ports on fiat coupe
Replies: 2
Views: 19

Re: Diagnostic ports on fiat coupe

I think you will find the airbag ECU port under the dashboard not to far from the ECU which if I recall correctly is situated under the aircon unit on the central tunnel. ABS is I think located near the ABS unit. If you can't find I'll dig the manuals out and see if the wiring diags show *physical* ...
by s130
08 Feb 2018, 09:48
Forum: Feature Requests
Topic: Telecarregamento ONLINE
Replies: 1
Views: 167

Re: Telecarregamento ONLINE

If you are referring to MES being able to connect to Fiat systems for diagnostic and other support then no (as far as I'm aware).

What are you specifically wanting or looking for?
by s130
26 Jan 2018, 14:58
Forum: General
Topic: Fiat Tipo 1.4 2016
Replies: 1
Views: 53

Re: Fiat Tipo 1.4 2016

Looking at the supported vehicles list [http://www.multiecuscan.net/SupportedVehiclesList.aspx] the New Tipo 1.4 16V is supported, and most importantly the Body Computer is.

This means that you will be able to perform a Proxi alignment with the paid/licensed version of MES.
by s130
23 Jan 2018, 09:07
Forum: General
Topic: MultiECUScan 3.9 Released
Replies: 4
Views: 746

Re: MultiECUScan 3.9 Released

There are, to my knowledge, no special promo codes for anyone.

MES is very competitively priced compared to other products.
by s130
09 Jan 2018, 11:56
Forum: Usage Q&A
Topic: Multiecuscan Full package.
Replies: 23
Views: 484

Re: Multiecuscan Full package.

MES 1.5 (the version in your linked picture) is a very old version of MES and the format of the Errors page/tab has changed a little. However if you go into test mode with the current version of MES and select the Ducato 2.8 JTD (244) and go to the Errors tab YOU WIILL SEE EXACLTY what you are looki...
by s130
08 Jan 2018, 19:06
Forum: Usage Q&A
Topic: Multiecuscan Full package.
Replies: 23
Views: 484

Re: Multiecuscan Full package.

MES keeps CONNECTION logs in its directory.

These log show all error codes, parameter requests and responses.

This is what I mentioned and pointed at earlier.

Look in the MES Program directory for these files.

Go to advanced search