Search found 605 matches

by s130
26 May 2020, 07:14
Forum: General
Topic: New MY20 Ducato 2.3 180, MES compatibly
Replies: 4
Views: 382

Re: New MY20 Ducato 2.3 180, MES compatibly

As you have MES then all I can suggest is that you connect to your new MY20 and do a scan. This will detect modules and check their ISO codes to see if they are supported. Even if not supported many functions will still work. As for SGW then MES will tell you if this is installed. You will then need...
by s130
24 May 2020, 18:00
Forum: Bugs
Topic: ECU reading values
Replies: 3
Views: 425

Re: ECU reading values

I can't comment on Bluetooth interfaces as I've never used one. I've looked in test mode and the ABS odometer guide information says that it is derived form the engine ECU value and should be within 3% on the dashboard odometer. Not sure why you are reading nothing from the ABS odometer. The latest ...
by s130
24 May 2020, 09:26
Forum: Bugs
Topic: ECU reading values
Replies: 3
Views: 425

Re: ECU reading values

It is a fairly common reoccurring observation that people have had (me on the Croma 2005 I used to have and my current 500X) that the engine ECU odometer value does not match the dashboard odometer value. You can check the odometer values recorded in the ABS unit and Service unit with MES to see wha...
by s130
05 May 2020, 07:33
Forum: General
Topic: Noob questions
Replies: 4
Views: 529

Re: Noob questions

With your Fiatecuscan KKL 409.1 Switch USB then the numbers refer to which Pin the KKL signal is connected. With normal VAG/KKL interfaces the signal is on Pin 7. So with your switch modified version the signal is connected to Pin 7 when the switch is aligned with the number 7. This would be general...
by s130
25 Apr 2020, 16:32
Forum: General
Topic: Fiat Tipo activate cornering fog lights
Replies: 4
Views: 4005

Re: Fiat Tipo activate cornering fog lights

Have you done a Scan with MES to see what is installed? You could also try an Proxi Alignment to see if this picks up your installed lights. After this (if this does not work) then I guess you will need to do a custom Proxi data update. However this requires the EXACT knowledge of which bytes(s) nee...
by s130
24 Apr 2020, 07:42
Forum: Usage Q&A
Topic: Compression pressure testing possible via Multiecuscan?
Replies: 1
Views: 789

Re: Compression pressure testing possible via Multiecuscan?

Not as a specific function. MES can measure and graph RPM and air flow so you could use these as a rough guide during a "cranking" test. CAUTION! Cranking tests must ensure that the spark plugs are properly connected and able to spark in open air otherwise you can damage your ECU/coil packs. Tests s...
by s130
23 Apr 2020, 07:30
Forum: Bugs
Topic: SGW Module Detected
Replies: 10
Views: 2074

Re: SGW Module Detected

I think MES says that it is detecting the missing SGW because MES is looking at proxi or other data to make this determination. Suggest you try a simple actuator test (eg connect to the body computer and turn a light off and on, or connect to the engine ECU and test the engine fan). If the test work...
by s130
23 Apr 2020, 07:23
Forum: General
Topic: MiTo DPF Light
Replies: 3
Views: 623

Re: MiTo DPF Light

Force regen will do no harm but I think you should possibly first do as you suggest a drive cycle. Before note all the DPF related parameters (there are quite a few) do the drive and afterwards read all the data again. Have a look at what has changed and if that change makes sense. If still no luck ...
by s130
22 Apr 2020, 16:46
Forum: General
Topic: MiTo DPF Light
Replies: 3
Views: 623

Re: MiTo DPF Light

Did you do the "Oil Change" reset and is done via the engine ECU Adjustments. This is different to the Service Reset.

Try a force DPF Regen.
by s130
18 Apr 2020, 08:02
Forum: General
Topic: Sport button fiat 500
Replies: 3
Views: 759

Re: Sport button fiat 500

Had a quick look and I can't see any obvious setting to permanently enable the Sport mode.

There could be a custom Proxi setting that will do this. Again I don't recall anyone having posted such information.