Multiecuscan

I have an 146 1.6 TS 1998 not starting. There are no warning lights going on, MES can connect to the ECU and shows no errors. It seems that there is no spark and no fuel injection albeit MES can activate the injectors. Timing belt is OK, fuel pump is runnning. There is fuel in the injection rail.......

One injector was faulty with too less impedance. So i replaced all of them.
Does the gasoline engine have an egr system?
Will check for leaks

Hello! After some time the car drives fine now with good torque. But still the uneven idlenafter starting persists. Goes aup to 1600rpm and then idles uneven at 1000 +-200 No errors stored. And I still wonder why the MIL did not come on on the procedure. Can you please suggest something? Should I do...

Hello! Doblo 2009 1,4 8V got new injectors. Did the self adaption afterwards. MIL did not come on. Revved 3 times to 5000rpm anyway. Idle is instable between 900 and 1600rpm, sometimes very low power. Did the procedure again today taking care to stay long enough above 5000rpm, still no MIL light, an...