Multiecuscan

Can you try this one? 33 31 33 33 30 33 30 34 32 37 30 4F 55 54 50 55 54 2D 53 49 54 20 18 02 22 4F 04 00 05 00 00 80 00 09 04 00 05 00 00 00 00 A7 C7 71 07 85 20 37 00 30 A0 4C 06 00 07 08 8C 03 15 01 28 C2 00 D1 01 35 41 0A 0C 0D 00 80 3E 58 00 02 00 00 32 00 29 03 00 11 1E 00 A0 20 05 05 00 00 00...

I would always choose for a multiplexed version with an CanTieCar connector. Never had any issues with any connection.

Why did you swap out the radio's? Original broken?

What Radio was in the car and what radio is in it now?

I can not look at any post because I get a white page with only "The service is unavailable." in the top left corner.

Very interested in the solution, I want to do the same to my Doblo.

It is possible, go to the engine ecu, go to adjustments and there you will see speed limmit

I have MES 5.1, and I can see the Clutch Degradation index in the parameters section, i see the following list:

https://postimg.cc/phtnTv02

The car is probally fitted with an SGW (Security Gateway Module), as long as you use genuine software (WiTech) it will let you do everything. But if you use MES it blocks pretty much everything. You can buy SGW bypass or bridge devices.

Had a similar problem when I send my ecu out to get remapped. I could activate it with ignition on and the screen said: Cruise control activated.

Send the ecu back to them and they fixed it right away. I think your engine ecu needs to be programmed also.