Search found 7 matches

by kisser
03 Oct 2021, 21:30
Forum: General
Topic: U1701 error on the engine control (NCM)
Replies: 4
Views: 20812

Re: U1701 error on the engine control (NCM)

Have some of you change the ABS unit ????? Because the problem is that the Engine Ecu can not connect to the ABS Ecu on the can line. There can be a problem with the connector on the ABS unit so that i can not send signal to the engine ecu on the can line. I have seen this before on some alfa romeo´...
by kisser
03 Oct 2021, 21:20
Forum: General
Topic: New to to fiatecumultiscan/ alfa gtv916 phase 2
Replies: 8
Views: 2882

Re: New to to fiatecumultiscan/ alfa gtv916 phase 2

If you have a vag/kll obd connector and the 3 pin adapter, you have to disconnect the L line in the 3 pin adapter. Otherwise you will get a connect time out / failure message from the multiecuscan program. so get an adapter or make a switch yo disconnect the L Line. The L line how would Iknow witch...
by kisser
14 Sep 2021, 21:07
Forum: General
Topic: Alfa Romeo SRS Code 1A - Airbag Control Light
Replies: 1
Views: 1392

Re: Alfa Romeo SRS Code 1A - Airbag Control Light

Hello

If i remember right the code 1A means that there is an internal failure in the Airbag ECU unit. The only way to delete the error is to reprogram the Airbag ecu eeprom. or get another Airbag ecu unit from anothere car with the same number as you have on your Airbag ecu unit.
by kisser
13 Sep 2021, 04:09
Forum: General
Topic: Fiat 500e radio replacement Proxi failure
Replies: 6
Views: 5849

Re: Fiat 500e radio replacement Proxi failure

Is the car from after start 2018 ???? If yes do you have a SGW bypass box ?????
by kisser
13 Sep 2021, 03:58
Forum: General
Topic: New to to fiatecumultiscan/ alfa gtv916 phase 2
Replies: 8
Views: 2882

Re: New to to fiatecumultiscan/ alfa gtv916 phase 2

If you have a vag/kll obd connector and the 3 pin adapter, you have to disconnect the L line in the 3 pin adapter. Otherwise you will get a connect time out / failure message from the multiecuscan program. so get an adapter or make a switch yo disconnect the L Line.
by kisser
02 Sep 2021, 23:52
Forum: General
Topic: Fiat Bravo 1.4 Turbo 2008 Replacing the TRW Electric Power Steering
Replies: 3
Views: 3295

Re: Fiat Bravo 1.4 Turbo 2008 Replacing the TRW Electric Power Steering

Have you done a vehicle type learn reset and steering angel calibration ??????
by kisser
01 Sep 2021, 21:59
Forum: General
Topic: Multiecuscan / multiplex modul / siemens MY99 airbag Connection Problems.
Replies: 0
Views: 2566

Multiecuscan / multiplex modul / siemens MY99 airbag Connection Problems.

Hello I have the Multiecuscan program and also the Multiplex/ cantiecar modul. And i works fine i all the years i have had it. But i am now having problems connecting to Siemens MY99 Airbag modul. It seems like i get some kind of time out, ????? I have been in contact with Yanislav but no help so fa...