Search found 6 matches

by cde
22 Aug 2010, 06:44
Forum: Usage Q&A
Topic: Fiat Panda 2004 1.2 8v on ELM327 1.2a
Replies: 3
Views: 3013

Re: Fiat Panda 2004 1.2 8v on ELM327 1.2a

Hi, I have an update which may help others on this forum, (which incidentally is the best one I have ever been on). My OBD Plug had the pins numbered wrongly and so I had wired my DIP switch incorrectly. The correct numbering is as follows:- As you look at the soldered pins side of the socket where...
by cde
22 Aug 2010, 06:41
Forum: Usage Q&A
Topic: ELM327 connection problem
Replies: 2
Views: 4158

Re: ELM327 connection problem

Solved with this post: "by croydonchris » Sat Aug 21, 2010 12:14 pm Hi, I have an update which may help others on this forum, (which incidentally is the best one I have ever been on). My OBD Plug had the pins numbered wrongly and so I had wired my DIP switch incorrectly. The correct numbering is as ...
by cde
20 Aug 2010, 22:18
Forum: Usage Q&A
Topic: ELM327 connection problem
Replies: 2
Views: 4158

ELM327 connection problem

Hi, Could someone help me, I have a ELM327 cable v1.3a and I connect pin 7 to 1 and pin 7 to 9 to gain access to ABS and Electric Steering ECUs, but when I try the connection the following error appears --> ELM327->ECU Connection failed. The settings are ok 38400 for ELM cable in Multiecuscan progra...
by cde
10 May 2010, 16:47
Forum: Usage Q&A
Topic: Fiat Stilo 1.6 - Alarm
Replies: 2
Views: 2585

Re: Fiat Stilo 1.6 - Alarm

Entonox wrote:That is only possible in the registerd version of the software. These options are found in the body computer menu.
Tks 8-)
by cde
07 May 2010, 15:55
Forum: Usage Q&A
Topic: Fiat Stilo 1.6 - Alarm
Replies: 2
Views: 2585

Fiat Stilo 1.6 - Alarm

Hello,

It's possible with Multiecuscan access and configure the vehicle alarm code settings and how?
I would like to remove the arm and disarm beeps, it's possible?

Thanks
by cde
07 Apr 2010, 19:41
Forum: Usage Q&A
Topic: Service interval reset - FES 2.0
Replies: 1
Views: 2037

Service interval reset - FES 2.0

Hi,
I have a K-line connection cable but when I try to make a Service Interval Reset the Multiecuscan 2.0 ask me for a ELM 1.37 cable, it's not possible to make a service reset with a K-line cable?