Search found 155 matches

by mattydr67
21 Dec 2023, 13:35
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2535
Views: 3925767

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Share the other side of the PCB too
Good luck
by mattydr67
18 Oct 2023, 11:45
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2535
Views: 3925767

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

If you do not remove the resistor you will not be able to connect to CAN BUS controlers. So use a multimeter ( ohmeter ) to check if the resistor is there 120 ohm between CAN BUS pins 6-14. If there is you have to remove the resistor. If there isn't any resistance between OBD2 pins 6-14 ( on your in...
by mattydr67
02 Sep 2023, 08:18
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2535
Views: 3925767

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Forget about jumpers. Use adapters especially if you wanna use Proxy Alignament. Jumper just connect together some pins to make the interface comunicate with controlers on other pins the 7 (k-lin) or 6-14(CAN BUS) The best ways is to use adpaters or as me an all-in-one adpater that let you manually ...
by mattydr67
07 Aug 2023, 10:34
Forum: Usage Q&A
Topic: Multiecuscan Adapters
Replies: 2
Views: 2523

Re: Multiecuscan Adapters

Hi
Sure I sent you details from where I got it by Private Message.
Good luck
by mattydr67
20 Jul 2023, 14:18
Forum: Usage Q&A
Topic: Multiecuscan Adapters
Replies: 2
Views: 2523

Multiecuscan Adapters

Hello guys This post is just for information. I bought few months ago this all-in-one adapter. I just wanted to share my experience with you. This all-in-one adapter replace all the colored cable adapters that I used before and I do not need to change cables during the diagnostics. Me I am using an ...
by mattydr67
15 Dec 2015, 08:50
Forum: General
Topic: CAN NOT MAKE MES 2.2 WORK WITH WINDOWS 10
Replies: 1
Views: 3068

Re: CAN NOT MAKE MES 2.2 WORK WITH WINDOWS 10

Try MES v2.8R1
See if its working
Good luck
by mattydr67
04 Sep 2015, 13:38
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2535
Views: 3925767

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Hi You can check here what controlers need adaptor A3 http://www.multiecuscan.net/SupportedVehiclesList.aspx Then your pics is not such a good. I cannot figure it out where is the rezistor that need to be removed. This is for CAN Bus but as I said you will need adaptor A3 too for controlers on CAN B...
by mattydr67
19 Aug 2015, 15:23
Forum: General
Topic: CanTieCAR & 3-pin auto
Replies: 3
Views: 4109

Re: CanTieCAR & 3-pin auto

Don't you have a chinese 3 pins adaptors?
All are the same
Take alook here: http://www.autotronic.ch/media/images/fiat-3pin-1.jpg
Good luck
by mattydr67
10 Aug 2015, 12:09
Forum: General
Topic: Multiecuscan 2.5
Replies: 2
Views: 5678

Re: Multiecuscan 2.5

All you need you will find here sir
http://www.multiecuscan.net/ReleaseHistory.aspx
Good luck
by mattydr67
01 Aug 2015, 18:27
Forum: Usage Q&A
Topic: liecence expired
Replies: 2
Views: 3803

Re: liecence expired

- The License is also valid for 1-YEAR FREE UPDATES of the multiecuscan software. After 1 year you can continue to use the software forever, but you will not be able to update it. The price of additional 1-YEAR updates is the same as the regular REGISTERED License price (50 EUR). Check first iof you...