Search found 14 matches

by rs3100
08 Jun 2020, 08:10
Forum: General
Topic: New MY20 Ducato 2.3 180, MES compatibly
Replies: 5
Views: 568

Re: New MY20 Ducato 2.3 180, MES compatibly

I haven't tried MES on a vehicle with the SGW, so I don't know what happens. But when I bought my Euro 5+ van back in 2016, it s build had been delayed due to a factory shutdown, and when it came through it turned out to be an amalgamation of Euro 5+ and Euro 6 parts in some areas. ECUs that were to...
by rs3100
07 Jun 2020, 09:08
Forum: General
Topic: Definition of EOL OK?
Replies: 2
Views: 241

Re: Definition of EOL OK?

As I understand it, it is a function of the network architecture employed by FCA. The master vehicle configuration is stored in the BCM, but several other ECUs store a copy of the configuration file. When you change the BCM configuration and complete a proxi-alignment, the main BCM file is copied to...
by rs3100
13 Oct 2019, 12:45
Forum: General
Topic: Service reset not posible with elm327
Replies: 18
Views: 4188

Re: Service reset not posible with elm327

I have a cheap ELM adapter that works on both of our cars, but won't connect to the Ducato through the adaptor cables. I bought an OBDKey ELM adapter and it works fine. There are a lot of Chinese ELM327 adapters that won't connect through MES or AlfaOBD. This topic will explain further: http://forum...
by rs3100
09 Aug 2019, 10:52
Forum: General
Topic: MES requires admin privilege to run on Win 7 & 10
Replies: 2
Views: 746

Re: MES requires admin privilege to run on Win 7 & 10

s130 wrote:
09 Aug 2019, 10:19
Has always been like this on Windows 7, 8.1 and 10.

Nothing to worry about.
Thank you :)
by rs3100
08 Aug 2019, 09:44
Forum: General
Topic: MES requires admin privilege to run on Win 7 & 10
Replies: 2
Views: 746

MES requires admin privilege to run on Win 7 & 10

Hello, I have been running MES on a Win XP laptop for quite a while, and it runs from a standard user account without elevation. I have just installed Windows 7 on the machine as it is a minimum requirement for other software that I now need to run, but now MES prompts for the admin password via UAC...
by rs3100
03 Aug 2018, 09:49
Forum: Usage Q&A
Topic: can-bus issues
Replies: 2
Views: 1264

Re: can-bus issues

Hello Rolf, The Unknown/Unsupported dashboard module simply means that Multiecuscan does not recognise the module, which I suspect is the radio unit. This is possibly because it is a North American vehicle specific radio which has not been added to MES. The same would most likely apply to the engine...
by rs3100
16 Jul 2018, 08:09
Forum: General
Topic: ODO blinking after proxi alignment fiat bravo 13
Replies: 5
Views: 1423

Re: ODO blinking after proxi alignment fiat bravo 13

the purpose of aligning in the first place isnt to stop the blinking odometer after installing ANY aftermaket radio? No, it is to copy the configuration of the vehicle as defined in the Body Control Module to other ECUs on the vehicle that need the information for correct operation of the vehicle n...
by rs3100
13 Jul 2018, 11:36
Forum: General
Topic: ODO blinking after proxi alignment fiat bravo 13
Replies: 5
Views: 1423

Re: ODO blinking after proxi alignment fiat bravo 13

At the risk of stating the obvious, change it back to the previous setting and proxy align again! it only fixes it if I keep radionav and B&M plugged in, but the purpose is to change the radio Then there is a configuration mismatch between the vehicle and the radio, or the radio is not compatible w...
by rs3100
08 Jul 2018, 10:20
Forum: General
Topic: ODO blinking after proxi alignment fiat bravo 13
Replies: 5
Views: 1423

Re: ODO blinking after proxi alignment fiat bravo 13

At the risk of stating the obvious, change it back to the previous setting and proxy align again!
by rs3100
03 Jul 2018, 08:04
Forum: Bugs
Topic: MES 3.7 Ducato X290 window actuation
Replies: 1
Views: 1236

Re: MES 3.7 Ducato X290 window actuation

Actuation still operates window on opposite side to that stated in MES 4.1