Search found 8 matches
- 06 Sep 2017, 16:09
- Forum: Bugs
- Topic: "Undefined error" while programming remote on new Bravo
- Replies: 6
- Views: 10668
Re: "Undefined error" while programming remote on new Bravo
I know this is an old post, but just wondered if there was a solution to this problem, as had the same error while attempting to programm remote on brava '09' , using 3.7 with cantie interface.
- 25 Apr 2017, 18:53
- Forum: General
- Topic: Alfa gt non start/can issues
- Replies: 0
- Views: 1164
Alfa gt non start/can issues
Alfa gt 1.9jtdm '07' Faults:- non start', only the srs lamp illuminated (flickers) on dashboard/cluster, no other lights gauges work, no comms with cluster/srs/abs and sasn, done a scan with multiecuscan and showing NBC=EOL OK, NCM=ok, NQS=EOL Failed, NFR=Removed, steering angle sensor (NAS=removed)...
- 19 Nov 2015, 19:55
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
Re: CANtieCAR interface
Update I had a computer technician look over circuit board with a microscope and he has identified a dry joint near sd card mount, he's managed to resolder using a blower and bingo it now works fine with a new sandisk card ( he advised me they are good quality) formatted, and installed latest driver...
- 18 Nov 2015, 08:51
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
Re: CANtieCAR interface
Bri, I've tried holding button in and connecting to usb as per cantie flow chart, still no success, iam going to go over circuit board with a magnifying glass to check board for dry solder joints as a last resort, in the short term I 'll have to purchase a lead kit from gendan, not sure if that will...
- 17 Nov 2015, 21:33
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
Re: CANtieCAR interface
I've purchased a new sd card, formatted and copied required files onto it, but still not showing as a drive when connected, so iam resigned to the fact the interface is faulty, so I'll have to purchase a elm interface for the time being as I cannot afford the €190 for the upgrade interface at the mo...
- 16 Nov 2015, 23:32
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
Re: CANtieCAR interface
Ok, I'll purchase a new sd card and try that first, what about the licence details, I assume they are on the card somewhere, I've downloaded the updated files from cantie ready, thanks for your help.
- 16 Nov 2015, 19:10
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
Re: CANtieCAR interface
I removed the card today and inserted into a sd card adapter and managed to read all the files on it, I also checked for viruses, all ok, so I think there must be a hardware fault, also when plugged into a obd port the Bluetooth light doesn't light up, I'll have to purchase another interface by the ...
- 13 Nov 2015, 15:36
- Forum: General
- Topic: CANtieCAR interface
- Replies: 12
- Views: 9205
CANtieCAR interface
Hi, iam having a problem with my CANtieCAR interface, went to use it today and it's not connecting to the software (not seeing it), also I cannot see it listed on the devices screen, I've tried a new usb lead And also tried on another computer, the green light comes on, cannot understand it as I use...