Search found 27 matches

by hanzs
07 May 2010, 13:47
Forum: Usage Q&A
Topic: What does engine "Stalled" mean?
Replies: 2
Views: 2628

Re: What does engine "Stalled" mean?

I would check the main ground wire between battery, chassis and engine.
by hanzs
27 Apr 2010, 19:59
Forum: Bugs
Topic: Engine Revving and dropping rpm after using FES
Replies: 6
Views: 4841

Re: Engine Revving and dropping rpm after using FES

This 5 minutes of disconnection of battery should do something like 'restart' of ECU as I understood.
You can try, you will see.
by hanzs
24 Apr 2010, 17:43
Forum: Usage Q&A
Topic: Self-adaptation reset problem
Replies: 12
Views: 11199

Re: Self-adaptation reset problem

I had the same problem and this was because of misfires. One ignition coil was bad. Does work all four cylinders on your car?
by hanzs
21 Apr 2010, 15:31
Forum: General
Topic: O2 sensor signal
Replies: 8
Views: 6148

Re: O2 sensor signal

My opinion is, that both O2 sensors are ok. Both shows values between 0,05-0,8V and this is ok. RPM changing on idle is probably due the mess in throttle valve (very common problem). My picture of o2 sensors: "volnobeh"=idle , "proslapavani plynu"=playing with gas pedal (rpm changing). http://merkur...
by hanzs
09 Apr 2010, 11:46
Forum: Bugs
Topic: Two questions, spark advance value and knock sensor value
Replies: 12
Views: 10849

Re: Two questions, spark advance value and knock sensor value

Ok, I understand.
As follow your explanation - fault P0136 was confirmed because is "Stored" now. But no MIL light on dashboard! It is what i cant understand :?

About "freeze frame" - I cant read it, I dont know how?
by hanzs
08 Apr 2010, 18:47
Forum: Bugs
Topic: Two questions, spark advance value and knock sensor value
Replies: 12
Views: 10849

Re: Two questions, spark advance value and knock sensor value

p0136.jpg About two weeks ago I cleared the fault. And yesterday came again. Maybe there was some short flashes of MIL light in that period, but I´m not sure. But when I read the fault, the MIL light was OFF. Maybe when fault is in mode "Present" then light ON means currently ON. And when is "Store...
by hanzs
08 Apr 2010, 12:31
Forum: Bugs
Topic: Two questions, spark advance value and knock sensor value
Replies: 12
Views: 10849

Re: Two questions, spark advance value and knock sensor value

I did new testing and export data to csv file. And there is several times value of spark advance about 6400 deg. http://merkur_sound.sweb.cz//aaaa.csv I would like to upload the file like attachment, but extension csv is not allowed. And I did find another problem, I have read fault P0136 - O2 senso...
by hanzs
06 Apr 2010, 09:13
Forum: Bugs
Topic: Two questions, spark advance value and knock sensor value
Replies: 12
Views: 10849

Re: Two questions, spark advance value and knock sensor value

I tried another scale, some error message occurs.

I looks like some strange value of spark advance is received when accelerate...?
by hanzs
06 Apr 2010, 09:07
Forum: Usage Q&A
Topic: WHICH ELM 327 cable?
Replies: 6
Views: 5103

Re: WHICH ELM 327 cable?

hi mjanezic,
Dont worry, this cable is detected as ELM 327 v1.3 and works fine, I personaly tried it, even service interval reset,
as you can see:
[img]http://merkur_sound.sweb.cz//v2da.jpg[/img]
by hanzs
05 Apr 2010, 19:48
Forum: Usage Q&A
Topic: ELM 327 connection
Replies: 16
Views: 12608

Re: ELM 327 connection

Yani wrote: ELM 327 v1.3 SUPPORT! The program now works with 2 types of interfaces - VagCom and ELM 327 v1.3. There are limitations for both interfaces - VagCom does not work for CAN modules, and ELM 327 does not work with some of the older modules (like the airbags) and that is a limitation of ELM ...