Search found 940 matches

by yani
02 Mar 2017, 14:02
Forum: Usage Q&A
Topic: V3.5 on Ducato 2.8JTD, 2005, Bosch ABS 5.3ASR
Replies: 14
Views: 122

Re: V3.5 on Ducato 2.8JTD, 2005, Bosch ABS 5.3ASR

Did you check the latency settings of the KKL interface drivers? In most cases the unstable connection is caused by high latency.
by yani
19 Feb 2017, 12:26
Forum: Feature Requests
Topic: Enable TCT steering wheels paddles
Replies: 4
Views: 157

Re: Enable TCT steering wheels paddles

You can try the following: 1. Connect to your car with CAN Setup/PROXI Alignment and go to Adjustments 2. press ctrl+alt+c from the keyboard- Multiecuscan will open a window with title “Custom PROXI” 3. change byte 80 as follows: -if it is 00 then change it to 20 -if it is 01 then change it to 21 -i...
by yani
18 Feb 2017, 08:03
Forum: General
Topic: Multiecuscan 3.5 Released!
Replies: 2
Views: 346

Multiecuscan 3.5 Released!

We released Multiecuscan 3.5 today with following changes: - Added information for more ISO codes from 2015-2016 vehicles - Added support for high speed mode of ELM327 interfaces (It is listed as ELM 327 1.3/1.4/1.4b/2.1 (High Speed) in the list of interfaces. This will switch any ELM interface to 1...
by yani
17 Feb 2017, 08:13
Forum: Feature Requests
Topic: Enable TCT steering wheels paddles
Replies: 4
Views: 157

Re: Enable TCT steering wheels paddles

What make/model/year is the car?
by yani
04 Jan 2017, 11:50
Forum: Usage Q&A
Topic: 2014 Fiat 500 Abarth (North American) - Upgraded instrument panel to TFT
Replies: 16
Views: 626

Re: 2014 Fiat 500 Abarth (North American) - Upgraded instrument panel to TFT

The other values which you can try are 20 and 40. One of these should set it to "Sport" type.
by yani
25 Dec 2016, 08:05
Forum: Feature Requests
Topic: Proxi Alignment Jeep Renegade
Replies: 3
Views: 5801

Re: Proxi Alignment Jeep Renegade

There is no PROXI support for Renegade yet, but you can use the PROXI from Fiat 500X. You will need adapter 5 and adapter 6 during the PROXI process. Also, it may not be possible to connect to PROXI with some ELM interfaces as they are too slow, the OBDLink interfaces work ok.
by yani
25 Dec 2016, 07:57
Forum: Usage Q&A
Topic: 2014 Fiat 500 Abarth (North American) - Upgraded instrument panel to TFT
Replies: 16
Views: 626

Re: 2014 Fiat 500 Abarth (North American) - Upgraded instrument panel to TFT

Please try the following: 1. Connect to your car with CAN Setup/PROXI Alignment 2. Go to Adjustments 3. press ctrl+alt+c from the keyboard 4. Multiecuscan will open a window with title “Custom PROXI”. Be very careful here not to delete or change something! 5. You should see a box with many bytes of ...
by yani
16 Dec 2016, 20:03
Forum: General
Topic: Multiecuscan 3.4 Released!
Replies: 1
Views: 1862

Multiecuscan 3.4 Released!

We released MultiECUScan 3.4 today with the following changes: - Added support for Egea/Tipo 2015 - Some minor improvements in the interface configuration and auto-detection - Fixed some connection problems with ELM v2.1 - Support for Bosch Motronic Me17.3.0 CF6/EOBD Injection (1.4 16V) (Egea, Tipo)...
by yani
07 Nov 2016, 19:14
Forum: General
Topic: CANtieCAR important firmware update
Replies: 3
Views: 4125

CANtieCAR important firmware update

Recently we fixed a bug in the CANtieCAR firmware which affects ALL CAN protocols. The bug affects all versions of CANtieCAR - v2.x, v3.x, v4.x. We recommend all interfaces to be updated to the latest firmware. Here is the correct procedure for updating the CANtieCAR firmware: For all CANtieCAR v4.x...
by yani
02 Aug 2016, 14:55
Forum: General
Topic: Multiecuscan 3.2 released!
Replies: 1
Views: 2613

Multiecuscan 3.2 released!

We released Multiecuscan 3.2 today with the following changes: - Added support for Jeep Renegade - Added DRL configuration for Freemont, Thema, Journey - Added "Vehicle configuration reset" function for TRW Lucas ABS - Support for Bosch EDC17C69 CF6/EOBD Diesel Injection (1.6, 2.0) (500X, ...

Go to advanced search