Multiecuscan

Yes that is correct, i also read that value out of my selespeed system.

Belli,

The Fiat selespeed models can not be adjusted by hand, because they have a hydraulic actuator instead of a mechanical actuator (which are in the alfa`s).

I have both ELM and KKL interfaces, but i used the ELM interface.

does this apply for all vehicles? as i have a stilo but i don`t see an engine number with a dot in it.

People, i found more information about the calibration procedures, i edited my previous post with the correct procedures and requirements. I'll post them here again; Requirements - Engine coolant temp > 80 degr. celcius - Clutch temp between 20 - 150 degr. celcius - No errors in engine ECU - No erro...

Spyshagg,

Can you look up something for me? if you connect to the engine ECU in FES there is a parameter in the list (almost at the bottom) that is named 'Automatic transmission' mine says manual what does yours say?

I did this procedure on my stilo selespeed many months ago with Vagcom cable. It seemed to work fine. Gave me a 00. But My problem was solved (very small judders). The values changed, both the index and the push rod distance. 1st gear for 300 meters at 25% throttle. I tried it again about a month a...

Yani (and ofcourse other members), I update this post as i found new and correct ways to execute the procedures. Requirements before both procedures can be executed; Requirements - Engine coolant temp > 80 degr. celcius - Clutch temp between 20 - 150 degr. celcius - No errors in engine ECU - No erro...

well that seems all ok then, Tried it with hot engine but same result. Tomorrow i'll get hold of a brand new Snap-on diagnose tester which also should be able to perform both 'clutch self calibration' and 'calculate degredation index' tests. Lets see what i get with this tester so i can compare the ...

Are there any special conditions required to do these tests? i read somewhere that the engine should be hot, in order to execute the tests. They mention that even the examiner system requires the engine to be hot. i didn`t test this yet, maybe i'll try this in the afternoon. maybe Yani can give some...