Search found 6 matches

by Argo
09 Jun 2015, 15:21
Forum: Feature Requests
Topic: Giulietta Start/Stop Body Computer Reports
Replies: 1
Views: 3103

Giulietta Start/Stop Body Computer Reports

Would be really handy to have access to start/stop operating parameters (like provided by AlfaOBD)
by Argo
09 Jan 2011, 23:34
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2499
Views: 1861122

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Argo thankyou for your resistor 14 mod, just one question do i still need to carry out mod with resistors and caps, as my elm 1.4 is working fine now as i moved can lines to 1 9 for punto evo 1.4 8v. anyone shed any light on this Mine works fine without but I suppose if you're keen then it's worth ...
by Argo
08 Jan 2011, 10:50
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2499
Views: 1861122

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Personally I wouldn't even bother (as it works with your laptop) but all the info you need is in this thread if you do want to go ahead with the RC mod.

It's a fair bit of messing around and I suspect it wont work anyway :(
by Argo
07 Jan 2011, 23:06
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2499
Views: 1861122

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

sam29 wrote: I just destroed the capacitor.
R04 is a resistor :?

Assuming you only destroyed R04 then I'd go ahead with the full mod suggested by Yani at the start of this thread which involves soldering in a simple RC network.

That's the reason I said "quick & dirty"
by Argo
13 Dec 2010, 19:31
Forum: Feature Requests
Topic: How about ECU re-image (mapping)
Replies: 4
Views: 2971

How about ECU re-image (mapping)

I think Examiner can do this so why shouldn't Multiecuscan :idea:

Of course, finding good maps would be another issue.
by Argo
13 Dec 2010, 13:13
Forum: Usage Q&A
Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Replies: 2499
Views: 1861122

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

I found a quick and dirty solution: Bought the cheapest ELM327 interface from eBay (actually V1.4) Disassembled and found I had the board below. Using a craft knife I carefully destroyed the 120ohm resistor (R04 on the board). Be careful you don't damage R17 just beneath it. Resembled and it works a...