Search found 6 matches

by vesku
16 Mar 2010, 19:24
Forum: Feature Requests
Topic: diesel injectors
Replies: 0
Views: 1721

diesel injectors

Hi,

I'm going to change a new ecu to my 2.4 JTDM 20v. As far as I know I have to set the numbers of the injectors to the sw. Would it be a big task to make it possible? Unfortunately I'm in a hurry as everybody :P

vesku
by vesku
27 Feb 2010, 17:16
Forum: Feature Requests
Topic: immo "killer"
Replies: 10
Views: 7789

Re: immo "killer"

Fully agree with Jerry, IMMOs are there to prevent our alfas got stealen.
There should not be any freeware available to break that system.
vesku
by vesku
27 Feb 2010, 13:15
Forum: General
Topic: new ecu
Replies: 0
Views: 1790

new ecu

I'm worried about problems with immobilizer if I change ecu to another one. Does anyone know what happens if I change a new ecu to alfa 159 2.4JTDM? Will a brand new ecu couple itself with immobilizer automatically or how? Can I change the original ecu back without any problems with imobilizer again...
by vesku
21 Feb 2010, 15:23
Forum: Usage Q&A
Topic: cable for can-bus
Replies: 1
Views: 2557

Re: cable for can-bus

Hi I have 159 2.4 jtdm 2007, should be the same ecu as in brera First I tried with serial/usb adapter + vag cable with no success. Then I ordered a USB KKL cable from ebay by less than 10 euros and it works. First you should let the PC to load and install the driver, check from settings what port it...
by vesku
07 Feb 2010, 19:53
Forum: Usage Q&A
Topic: 2.4 JTDM
Replies: 2
Views: 3469

Re: 2.4 JTDM

I think there is a big difference between 156 and 159, when 159 is using the CAN-bus. Connection to engine ECU was quite good in 159 also.
by vesku
03 Feb 2010, 19:41
Forum: Usage Q&A
Topic: 2.4 JTDM
Replies: 2
Views: 3469

2.4 JTDM

thank's a lot for a fantastic tool! I connected ver 1.6 to alfa 159 2.4 JTDM 2007 All actual values seem to be OK, except the odometer is totally wrong. But most of the actuators do not follw the commands. e.g. none of the signal lamps came me on and fan 1 didn't start. I tested it power on but engi...